Emko EAOM-11.2 Bruksanvisning
Emko
Ikke kategorisert
EAOM-11.2
Les nedenfor 📖 manual på norsk for Emko EAOM-11.2 (10 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 26 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 13.5 brukere
Side 1/10
.
EMKO ELEKTRONIK SAN. Ve TIC. A.S. DEMIRTAS ORG. SAN. BOLG. KARANFIL SOK. TR 16369 BURSA / TURKEY
PHONE : + 90 224 2611900-pbx FAX : + 90 224 2611912 http:\\www.emkoelektronik.com.tr e-mail:emko@emkoelektronik.com.tr
Pages 1 / 9
EAOM-11.2
• Designed for diesel
generators...
• Long life membrane front key
pad.
• EEPROM internal memory
AUTOMATIC TRANSFER
SWITCH & START UNIT FOR
DIESEL GENERATORS
1. GENERAL INFORMATION
EAOM-11.2 Automatic Transfer Unit is designed to be
automatically engaged in case of energy failures in generators of
various capacities. The Automatic Transfer Unit is capable of
disengaging and thus protecting either the generator or the
energy receiving system (load) depending upon the type of
failure. Any failures are indicated on the Failure Led Indicators
upon the Transfer Unit and could be stored in memory until
failure deletion. In case of any failure, the unit is also capable of
giving a vocal warning (horn) and either a Yellow or Red Alarm
warning output depending upon the type of failure and in order to
warn the operator in charge. The front board of the Automatic
Transfer Unit features push-buttons to select the run mode, to
silence the horn, to delete failures and to test the bulb, as well as
led indicators to show failures and run modes. EAOM-11.2
Automatic Transfer Unit which features serial communication
outlet (RS-232) is capable of connecting to personal computers
(PC). This connection enables the operator to observe the
mains, generator voltages, speed information, failures and relay
outlet status on the computer display. Added to this, the
programme parameter values stored in the Automatic Transfer
Unit could be changed and current values could be observed.
Also, the programme parameters of the Automatıcal Transfer
Board could be changed by means of a special programmer. Led
indicators for failures and run modes could be tested by means
of a bulb test.
Produkspesifikasjoner
| Merke: | Emko |
| Kategori: | Ikke kategorisert |
| Modell: | EAOM-11.2 |
Trenger du hjelp?
Hvis du trenger hjelp med Emko EAOM-11.2 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Emko Manualer
30 Desember 2025
30 Desember 2025
30 Desember 2025
30 Desember 2025
30 Desember 2025
30 Desember 2025
Ikke kategorisert Manualer
- GeoBox
- TCL
- Olympia
- Stirling
- Princeton Tec
- Sonnenkonig
- DOD
- Aalberg Audio
- Furrion
- Brizo
- Harder & Steenbeck
- Exquisit
- Fein
- Envivo
- ZLine
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025