ErgoAV ERDGM4 Bruksanvisning

Les nedenfor 📖 manual på norsk for ErgoAV ERDGM4 (13 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/13
English pages
02-12
French pages
13-23
Spanish pages
24-34
Model: ERDGM4-01 B
Thank You for Choosing this ErgoAV Product!
At ErgoAV, we want to add value to your AV experience by providing the highest
quality products and services
in
the industry. If you have any concerns or
comments, please contact
us.
ErgoAV Customer Care
phone:
(877)419-7832
email: support@ergoav.com
website: .ergoav.com
address: 9501 Louisiana Ave
N,
#200, Brooklyn Park,
MN
55445
IMPORTANT SAFETY INFORMATION
Please carefully read all instructions before attempting installation. If you do not understand the
instructions
or
have any concerns
or
questions, please contact Technical Support at (877)
419-7832
or
Customer Service at support@ergoav.com.
ACAUTION: Avoid potential personal injuries and property damage!
Do
not use this product
for
any purpose that is not explicitly specified in this manual.
Do
not exceed
weight capacity. We are not liable
for
damage
or
injury caused by improper mounting, incorrect
assembly
or
inappropriate use.
This product contains gas assist arms which are under high pressure.
Do
Not puncture these arms
or
expose the arms
to
fire
or
flame. If product is
or
becomes defective, please contact ErgoAV Customer
Support
at
support@ergoav.com
or
(877)
419-
7832
to
arrange a return.
Do
Not use this product
on
desks made
of
particle board
or
other
soft
woods.
The information contained in this manual does not cover all possible conditions
or
variables in
relation
to
the install
of
this product.
Weight Restrictions
If your monitor weighs
more, this mount is
NOT compatible. Monitor
should not exceed
maximum listed weight.
WARNING
DO
NOT exceed the maximum weight indicated. This mounting
system is intended
for
use only within the weight range listed. Use
with products heavier than the maximum weight limit may result in
failure
of
the mount, causing potential damage and or injury.
It is the responsibility
of
the installer
to
verify the total weight
of
the monitors and any accessories attached.
Do
Not exceed the
weight limit listed.
Check the VESA Pattern of Your Monitor before the Installation
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
=
Measure Your Monitor's VESA Pattern:
Minimum: 75mm x
75mm/3"
x
3"
(WxH)
Maximum: 100mm x 1
00mm/
4"
x
4"
(WxH)
If your Monitor's VESA Pattern is smaller than 75mm x
75mm/3"
x
3"
or
greater than
100mm x
100mm/4"
x
4",
this mount is NOT COMPATIBLE with your Monitor.
Please contact our Technical Support
at
(877)
419-7832
or
support@ergoav.com
to
fmd a compatible mount.
02
TENSION ADJUSTMENT SHOULD
BE
DONE ONLY
AFTER MONITOR INSTALLATION
& Attention
DO
NOT adjust tension without monitor attached.
1. Verify the
weight
of
your
monitor
(including accessories) is less than
1 7 I bs (
7.
7 kg).
2.
Monitor
weight information can be found within
its
box
or
manual.
3.
Ensure
monitor
has been securely attached
to
the mount.
& WARNING:
Gas Spring Arm is under pressure and should be handled with care.
Failure
to
follow
the instructions may result in damage
to
the mount
and/or
personal injury.
03

Produkspesifikasjoner

Merke: ErgoAV
Kategori: Ikke kategorisert
Modell: ERDGM4

Trenger du hjelp?

Hvis du trenger hjelp med ErgoAV ERDGM4 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert ErgoAV Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer