EXSYS EX-12003 Bruksanvisning

EXSYS netverkskort/adapter EX-12003

Les nedenfor 📖 manual på norsk for EXSYS EX-12003 (2 sider) i kategorien netverkskort/adapter. Denne guiden var nyttig for 9 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 5 brukere

Last ned PDF

Side 1/2

6 5 1

Die EX 12003 ist eine USB 3.2 (Gen2) PCI Express (Gen3) Karte. Sie ist mit 2 externen USB - -

3.2 (Gen2) C Ports ausgestattet, die jeweils 3A Strom zu Verfügung stellen. Die EX 12003 - -

unterstützt die volle Leistung von 3A an beiden externen Ports ohne das Sie zusätzlichen Strom

vom PC Netzteil benötigen. Zusätzlich ist es möglich das USB Kabel an die externen Ports der -

Karte zu verschrauben. Sie unterstützt alle PCI Express Slots von x2 bis x16. Der serielle PCI- -

Express Bus unterstützt optimal die Leistung des schnellen ASMedia Chipsatz. Die EX 12003 -

gewährleistet so eine sichere Datenübertragung und exzellente Performance von bis zu 10Gbit

pro Sekunde! Die EX 12003 unterstützt alle USB Anschlüsse von 1.1 bis 3.2.-

ANSCHLÜSSE

BESCHREIBUNG & TECHNISCHE DATEN

AUFBAU

Anleitun

Vers. 1.1 / 22.11.19

E 1200

Kompatibilität: PCI Express (Gen3) p1-x2 bis x16 -

Betriebssysteme: Windows XP/ Vista/ 7/ 8.x/ 10/ Server 20xx/ Linux

Anschlüsse: 2x USB 3.2 (Gen2) C Buchse extern (verschraubbar) -

Lieferumfang: 12003, Low Profile Bügel, Treiber CD, Anleitung EX-

Zertifikate:

J3 & J4: 2x externe USB 3.2 (Gen2) C Buchse -

(verschraubbar)

J3 & J4:

Hinweis!

Durch die doppel Belegung der Pin s, kann der USB Typ C Stecker beidseitig in die ’-

Buchse gesteckt werden.

HARDWARE INSTALLATION

DRIVER INSTALLATION

Windows XP/ Vista/ 7/ Server 2003 & 2008 R2

After starting Windows is recognizes a new Start the „USB (Universal Serial Bus) Controller-“.

„ „ “setup.exe“ file which is in the ASM3142 folder (see picture):

Follow the installation instructions and complete the installation.

Windows will now install automatically you right driver for your particular operating system. After

the installation the operating system detects the card and automatically install them. If this fails

or you would like to install the driver manually, you can use the driver which is located in the

folder .„ “Driver

CHECK INSTALLED DRIVER

Open the >Device manager<. Now you should see at „USB-Controller“ the following new entry's:

If you see this or a similar information the device is installed correctly.

Please note the following installation instructions. Because there are large differences between the

PC’s, we can give you only a general installation instructions for the EX-12003. Please refer your

computer s reference manual whenever in doubt.’

1. Turn off the power to your computer and any other connected peripherals.

2. Remove the mounting screws located at the rear and/or sides panels of your Computer and

gently slide the cover off.

3. Locate an available PCI-Express expansion slot and insert the card. Make sure that the card

is plugged in correctly.

4. Then attach the card with a screw to the rear panel of the computer.

5. Gently replace your computer s cover and the mounting screws.’

Windows 8.x/ 10/ Server 2012 R2 & 2016

After the hardware installation, the operating system will recognize the device automatically and

install the drivers. If this fails and you need to install the driver manually, you can use the driver

which is located in the folder for your operating system (see picture).

For Server 2012 R2 please use the Windows 8 driver and for Server 2016 please use the

Windows 10 driver.

CHECK INSTALLED DRIVER

Open the >Device manager<. Now you should see at „USB Controller-“ the following new entry's:

If you see this or a similar information the device is installed correctly.

Linux

After the hardware installation, the operating system will recognize the device automatically and

install the drivers.

CHECK INSTALLED DRIVER

Now you should see the following new entry:

If you see this or a similar information the device is installed correctly.

Produkspesifikasjoner

Merke:	EXSYS
Kategori:	netverkskort/adapter
Modell:	EX-12003
Vertsgrensesnitt:	PCIe
Hot-swap:	Ja
Utvidelseskort standard:	PCIe 3.0
Utgangsgrensesnitt:	USB 3.2 Gen 1 (3.1 Gen 1)
Støttede Windows operativsystemer:	Ja
Intern:	Ja
Plugg inn og spill:	Ja
Støttede Linux operativsystemer:	Ja
Utvidelseskort formfaktor:	Lavprofil
Antall USB 3.2 Gen 2 (3.1 Gen 2) Type-A-porter:	3
Største båndbredde for port:	10 Gbit/s