Extron MDA 3A Bruksanvisning
Les nedenfor 📖 manual på norsk for Extron MDA 3A (1 sider) i kategorien Mottaker. Denne guiden var nyttig for 34 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 17.5 brukere
Side 1/1
1
MDA 3A • User Guide
This guide describes the installation and operation of the Extron MDA 3A Mini Distribution Amplier (MDA).
Introduction
The Extron MDA 3A is a one-input, three-output audio distribution amplier. The MDA 3A distributes balanced or unbalanced
audio on captive screw connectors. The MDA 3A ships with an external desktop 12 V power supply that accepts 100 to 240 VAC,
50 Hz or 60 Hz input.
Connections, Controls, and Indicator
Figure 1 shows all of the connectors on the MDA 3A.
BAL
1 2 3
MDA 3A
POWER
12V
.3A MAX
INPUT
RL
OUTPUTS
L 1 R 2L R L R3
UNBAL
ON
1 2 3
1
1
1
1
1
1 2
2
2
2
2
2 4
4
4
4
4
43
3
3
3
33
Rear
Distribution Amplifier
5
5
5
5
55
Front
1
Power Connector
3
Audio Outputs Connectors
5
Power LED
2
Audio Input Connector
4
Balanced/Unbalanced DIP Switches
Figure 1. MDA 3A Rear and Front Panels
Power
ATTENTION:
• Power supply voltage polarity is extremely important. Applying power with incorrect voltage polarity could damage the
power supply and the MDA. Identify the power cord negative lead by the ridges on the side of the cord.
• La polarité de la source d’alimentation est primordiale. Une alimentation avec une polarité de tension incorrecte peut
endommager la source d’alimentation ainsi que MDA. Il est essentiel d’identifier une connexion négative du cordon
d’alimentation au niveau des stries sur les parties latérales du cordon.
1
(see figure1) — Plug the external 12 VDC power supply into this two-pole captive screw connector. The Power connector
power supply is included with the unit. Figure 2 shows how to wire the connector.
Power Supply
Output Cord
Orange Captive Screw
Connector
0.3 inch (7 mm) MA
X
SECTION A–A
Ridges
Smooth
A A
Tie Wrap
ATTENTION:
• If not provided with a power supply, this product is
intended to be supplied by a UL Listed power source
marked “Class 2” or “LPS”, rated output 5Vdc min.
0.5A.
• Si ce produit n’est pas fourni avec une source
d’alimentation, il doit être alimenté par une source
d’alimentation certifiée UL de classe 2 ou LPS, avec
une tension nominale 5 Vcc, 0,5 A minimum.
Figure 2. Power Connector Wiring
Produkspesifikasjoner
| Merke: | Extron |
| Kategori: | Mottaker |
| Modell: | MDA 3A |
Trenger du hjelp?
Hvis du trenger hjelp med Extron MDA 3A still et spørsmål nedenfor, og andre brukere vil svare deg
Mottaker Extron Manualer
11 Mars 2025
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Mottaker Manualer
- Streacom
- Parasound
- Smart-AVI
- Inter-M
- Monitor Audio
- Elektrobock
- Futaba
- SRS
- Esoteric
- Bluesound
- Mark Levinson
- Dynacord
- Morel
- VigilLink
- Avantree
Nyeste Mottaker Manualer
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025
20 Oktober 2025