Fieldmann FDK 201302-E Bruksanvisning

Fieldmann Bli verre FDK 201302-E

Les nedenfor ๐Ÿ“– manual pรฅ norsk for Fieldmann FDK 201302-E (22 sider) i kategorien Bli verre. Denne guiden var nyttig for 10 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/22
'%,๎˜๎˜“๎˜‘๎˜’๎˜”๎˜‘๎˜“๎˜๎˜Ž๎˜&
๎˜–
1
๎˜—
)'.๎˜ƒ๎˜•๎˜“๎˜”๎˜–๎˜“๎˜•๎˜(
2
๎˜˜
๎˜‚
๎˜ƒ
๎˜™
)'.๎˜ƒ๎˜•๎˜“๎˜”๎˜–๎˜“๎˜•๎˜(
5
6
๎˜›
FDK 20 -E๎˜”๎˜–๎˜“๎˜•
Electrical Circular Saw๎˜XJUI๎˜"$๎˜-BTFS
INSTRUCTION MANUAL
Thank you for your purchase of the electrical circular saw. For your personal safety,
read and understand the Instruction Manual before using. Keep the Instruction Ma-
nual in a safe place for future reference.
TABLE OF CONTENTS
GENERAL SAFETY INSTRUCTIONS ........................................................................................... ๎˜™
SYMBOLS AND PICTOGRAMS ................................................................................................. ๎˜’๎˜“
MACHINE DESCRIPTION AND PACKAGE CONTENT .................................................... ๎˜’๎˜”
SAFETY INSTRUCTIONS ................................................................................................................. ๎˜’๎˜•
USE AND OPERATION .................................................................................................................. ๎˜’๎˜™
CLEANING AND MAINTENANCE ........................................................................................... ๎˜“๎˜‘
TECHNICAL DATA .......................................................................................................................... ๎˜“๎˜’
LIQUIDATION .................................................................................................................................... ๎˜“๎˜”
๎˜’.
๎˜“.
๎˜”.
๎˜•.
๎˜–.
๎˜—.
๎˜๎˜๎˜˜๎˜
๎˜๎˜๎˜™.
7DEOH๎˜ƒRI๎˜ƒFRQWHQWV
(1
ELECTRICAL CIRCULAR SAW OPER ATING INSTRUCTIONS
๎˜œ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ(1
7DEOH๎˜ƒRI๎˜ƒFRQWHQWV
๎˜’๎˜
Carefully read, remember and keep these safety instructions
WARNING! In the use of electric machines and power tools, it is necessary to respect
and follow the following safety instructions for the reasons of protection against electric
shock, personal injury and danger of ๏ฌre. The term โ€œpower toolโ€ in the instructions below
refers both to mains-operated (corded) power tool or battery-operated (cordless) power tool.
Save all warnings and instructions for future reference.
Workplace
Keep the work area clean and well lit. Cluttered or dark areas in the workplace invite
accidents. Store power tools that you donโ€™t currently use.
Do not operate power tools in environments with danger of occurrence of a ๏ฌre or explosion,
such as in the presence of ๏ฌ‚ammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep unauthorised persons, especially children, away from the work area while operating
a power tool! Distractions can cause you to lose control over the performed activity. In no
event leave your power tool unattended. Keep the equipment away from animals.
Electrical Safety
Power tool plugs must match the mains socket outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools. Undamaged plugs and
matching outlets will reduce risk of electric shock. Damaged or fouled supply cables increase
the risk of electric shock. If the power cord is damaged, it must be replaced by a new power
cord which is available at the authorised service centre or the importer.
Avoid body contact with earthed or grounded surfaces such as pipes, radiators, cooking
ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or
grounded.
Do not expose power tools to rain or wet conditions. Never touch the power tool with wet
hands. Never wash the power tool under running water or immerse it in water.
Never use the supply cable for other than intended purposes. Never use the cord for carrying
or pulling the power tool. Never unplug the plug from the outlet by pulling the cable. Keep
electric cables away from sharp or hot objects to prevent mechanical damage.
The power tool was designed to be powered solely by alternating electric current. Always
check if the electric voltage matches the information speci๏ฌed in the type label of the power
tool.
Never use power tool with damaged electric cable or plug or which has been dropped or is in
any way damaged.
GENERAL SAFETY INSTRUCTIONS
(1๎˜ƒ ๎˜”๎˜”๎˜ƒ *HQHUDO๎˜ƒVDIHW\๎˜ƒLQVWUXFWLRQV
FDK 20 -E๎˜”๎˜–๎˜“๎˜•
Power Tool Use and Maintenance
Always disconnect the power tool from the mains in case of any problem during the work,
before cleaning the power tool or its maintenance, during each transportation and after the
completion of the work! Never operate a power tool if it is damaged in any way.
Immediately stop working if the power tool generates abnormal noise or smell.
Do not overload the power tool. The power tool will operate better and safer if it is used at the
rate for which it was designed. Use correct power tool which is intended for the given activity.
The correct power tool will do the job it was designed for better and safer.
Do not use the power tool if it cannot be safely turned on and off using the control switch.
Use of such power tool is dangerous. Defective switches must be repaired by a certi๏ฌed
service provider.
Disconnect the tool from the power source before making any adjustments, changing
accessories or maintenance. Such preventive safety measure prevents the risk of starting the
power tool accidentally.
Store idle power tools out of the reach of children and unauthorised persons. Power tools can
be dangerous in the hands of untrained users. Store the power tools in a dry and safe place.
Keep the power tool in good condition. Check the adjustment of moving parts and their
mobility. Check for any damage to the protective guards or other parts which could affect
safe operation of the power tool. If damaged, have the power tool properly repaired before
further use. Many accidents are caused by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges facilitate work, reduce the risk of injury and are easier to control. Use of accessories
other than those speci๏ฌed in the instructions for use could result in damage to the power tool
and cause injuries.
Use the power tool, accessories and tool bits etc. in accordance with these instructions and
in the manner intended for the particular type of power tool taking into account the working
conditions and the work to be performed. Use of the power tool for purposes other than those
the power tool was intended for could result in hazardous situations.
Service
Do not replace parts of the power tool, do not make any repairs or interfere in any way with
the construction of the power tool. Have your power tool repaired by quali๏ฌed repair persons.
Any repair or modi๏ฌcation of the product without our companyโ€™s authorisation is
impermissible (it could cause injury or damage to the user).
Always have your power tool repaired in a certi๏ฌed service centre. Use only original or
recommended replacement parts. This will ensure that your safety and the safety of your
power tool is maintained.

Produkspesifikasjoner

Merke: Fieldmann
Kategori: Bli verre
Modell: FDK 201302-E

Trenger du hjelp?

Hvis du trenger hjelp med Fieldmann FDK 201302-E still et spรธrsmรฅl nedenfor, og andre brukere vil svare deg




Bli verre Fieldmann Manualer

Bli verre Manualer

Nyeste Bli verre Manualer