Fysic FKW-248 Bruksanvisning

Fysic Klokke FKW-248

Les nedenfor 📖 manual på norsk for Fysic FKW-248 (2 sider) i kategorien Klokke. Denne guiden var nyttig for 9 personer og ble vurdert med 3.9 stjerner i gjennomsnitt av 5 brukere

Side 1/2
FKW-248
SETUP
Slide the switch
to OFF (down).
A
Slide the switch
to OFF (down).
B
Insert 1.5V AA battery
into the clock
C
Insert 2x 1.5V C batteries
into the battery compart-
ment (+ to the left).
D
DAG DATUM MAAND
Instellen:
1. zet power schakelaar
op OFF
2. stel tijd in
3. stel dag in
4. stel datum in
5. stel maand in
6. stel jaar in
7. zet power schake-
laar op ON
Bij schrikkeljaar en zomer/
wintertijd de klok handmatig
aanpassen
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hesdo bv., Aziëlaan 12, 5232 BA,
s-Hertogenbosch, The Netherlands
FKW-248
Jumbo Analoge Klok
Power:
clock: 1x 1.5V AA
date: 2x 1.5V C
p.d. MMYY
v1.0
Attention: the day appears 2x consecutively. Stop the rst time it appears
when its currently before 12 o clock noon. If its after 12 o clock noon,
turn a little further until the day appears for the 2nd time.
Turn anti-clockwise
(e.g. towards your
body) to set the day.
20. 5.5 3
IN
OUT
° °C C
1. Getting started:
2. batteries in the outdoor sensor:
3. Time setup:
4. Day setup:
Use the small red wheel to set the
actual time, for now it doesnt matter
whether its before or after noon time.
DAG DATUM MAAND
Instellen:
1. zet power schakelaar
op OFF
2. stel tijd in
3. stel dag in
4. stel datum in
5. stel maand in
6. stel jaar in
7. zet power schake-
laar op ON
Bij schrikkeljaar en zomer/
wintertijd de klok handmatig
aanpassen
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Hesdo bv., Aziëlaan 12, 5232 BA,
s-Hertogenbosch, The Netherlands
FKW-248
Jumbo Analoge Klok
Power:
clock: 1x 1.5V AA
date: 2x 1.5V C
p.d. MMYY
v1.0
20. 5.5 3
IN
OUT
° °C C
Slide the battery cover off
the outdoor sensor
Insert 2x AA 1.5V
batteries
Slide the battery cover
back into the outdoor
sensor
Placing the batteries into the outdoor sensor must be
done after inserting the 1.5V C within 1 minute
batteries into the clock. The outdoor sensor will then be
linked directly with the clock.
If it takes longer before you place the batteries into the out-
door sensor, the sensor wont be linked with the clock and
the ‘OUT’ read-out will remain empty.
In this case, remove both the batteries from the outdoor
sensor and the C batteries from the clock and then re-insert
all of them within one minute.

Produkspesifikasjoner

Merke: Fysic
Kategori: Klokke
Modell: FKW-248

Trenger du hjelp?

Hvis du trenger hjelp med Fysic FKW-248 still et spørsmål nedenfor, og andre brukere vil svare deg