Garde XL 181XLDC38 Bruksanvisning
Garde XL
kuttemaskin
181XLDC38
Les nedenfor 📖 manual på norsk for Garde XL 181XLDC38 (1 sider) i kategorien kuttemaskin. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/1
QUICK START GU
XL VEGETABLE DICERS
MODELS
181XLDC14 - ¼", 181XLDC38 - ⅜", 181XLDC12 - ½", 181XLDC1 - 1"
Please read and comply with the instructions listed on this
document. To get the best service life and performance from your
machine, clean it thoroughly before and after use by following the
instructions listed below. Minimize the use of alkaline cleaners as
they may dull the finish and cause pitting.
SAFETY INSTRUCTIONS
CAUTION
Be careful when handling and operating the machine, as
the blades are very sharp. Always keep your hands away
from the blades.
OPERATION
1. Place the unit on a sturdy work surface.
2. Core, slice, or cut the produce to prepare it for
chopping.
3. Lift the handle and place the produce on the blades.
4. Remove hands from the cutting area.
5.Inoneuidmotion,bringthepushblockdowntoforce
the produce through the blades.
6. Lift push block and repeat as needed.
7. Clean the machine after chopping is complete using
the cleaning instructions below.
8. Do not chop produce larger than the opening in the
blade holder.
Note: to cut ¼" and ½", use ¼" push block. To cut ⅜", use
the push block. To cut 1 , use the 1⅜" " " push block.
CLEANING AND MAINTENANCE
1. Remove the handle, push block guide, bumpers, and
bladeandholderassemblyotheguiderods.
2. Wash the push block guide, push block, blade and
holder assembly, and frame thoroughly.
a. The push block can be removed from the push block
guide by removing the thumbscrews.
3. To disassemble the blade and holder assembly for
further cleaning:
a. Remove the screws and the blade holder plate.
b. Gently tap the blades and the blade spacers from
the blade holder.
4. To reassemble:
a. Place the blade holder on a sturdy surface with the
blade spacer pockets facing upward.
b. Insert the 4 blade spacers with their slots toward the
inner opening of the blade holder.
c. Insert blades with the sharp edge downward and
slots upward.
d. Insert blades with sharp edge and slots downward.
e. Reposition the blade holder plate and secure it
with screws.
f. Reposition the blade and holder assembly, bumpers,
push block, push block guide, and handle on
the frame.
5. When needed, lubricate the guide rods with mineral oil,
foodgradegreaseorparan.Do not use cooking oil.
REPLACEMENT PARTS
These parts can be purchased from the same location as the dicer.
ITEM NUMBER DESCRIPTION
181BAXL14 1/4" Blade Assembly
181BAXL38 3/8" Blade Assembly
181BAXL12 1/2" Blade Assembly
181BAXL1 1" Blade Assembly
181BL14XL 1/4" Blade (26 Blades)
181BL38XL 3/8" Blade (18 Blades)
181BL12XL 1/2" Blade (12 Blades)
181BL1XL 1" Blade (6 Blades)
181PBXL38 Pusher Block for 3/8"
181PBXL1412 Pusher Block for 1/4" & 1/2"
181PBXL1 Pusher Block for 1"
181FT1 Feet
181BUMPER Bumper
07/2023
Produkspesifikasjoner
| Merke: | Garde XL |
| Kategori: | kuttemaskin |
| Modell: | 181XLDC38 |
Trenger du hjelp?
Hvis du trenger hjelp med Garde XL 181XLDC38 still et spørsmål nedenfor, og andre brukere vil svare deg
kuttemaskin Garde XL Manualer
22 August 2025
kuttemaskin Manualer
- kuttemaskin Electrolux
- kuttemaskin Kogan
- kuttemaskin Gorenje
- kuttemaskin Milwaukee
- kuttemaskin Graef
- kuttemaskin Wilfa
- kuttemaskin Tefal
- kuttemaskin Dito Sama
- kuttemaskin Vollrath
Nyeste kuttemaskin Manualer
22 August 2025
21 August 2025
21 August 2025
21 August 2025
21 August 2025
20 August 2025
20 August 2025
14 August 2025
12 August 2025
12 August 2025