Gembird 3DP-PLA-FL-01 Bruksanvisning

Gembird Ikke kategorisert 3DP-PLA-FL-01

Les nedenfor 📖 manual på norsk for Gembird 3DP-PLA-FL-01 (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/1
Printing Temp Tensile strength (X-Y) 8.8-9.3 Mpa
Bed Temp Bending strength 30000 lb/in2
Density (g/cm³) Elongation at break (X-Y)
500-600
%
Retraction distance Melting Point 137 ºC
Retraction speed Melt Volume Rate 6.38 (170 ºC , 2.16 kg)
FLEXIBLE PLA+ (FPLA+) PRINT RECO ENDATIONSMM
FPLA+ Technical details
190-220 Cº
0-40
º
C
Gembi ope B.V.rd Eur
Wi evrouwen , CD Al re, The Ne erla s.56 1358 me th nd
1.21-1.30 g/cm³
1 cm
20 /smm
54 ºC
The FPLA is strin ng and zing.gi oo
We re end f you to use a 0.6 no le and print at acomm or mm zz
nozzle tempera re of 0tu 19
0
C with a bed temperature of 40 .
Moisture absorption resistance of FPLA
+
Filament
Since Flexible PLA
+
(FPLA
+
) comes from the PLA family and since it is soft, it will easily absorb moisture.
We strongly recommend that the filament be kept in the vacuum bag immediately after its use and not be kept
outside.
If the humidity in the filament persists, it is recommended to dry the filament at 50 ºC for 2 to 3 hours and then
use it for best results.
Use following parameters to prevent Stringing & Adhesion
Issue
Solution
The Filament is adhering a lot. This st adheres too well touff
textured PEI treated beds. The bo om layer is di cu to lt
remove and stretches leaving a
white l ed texture on the print.co or
Re ends using PVB obe in the plate lower the print temperature tocomm gl or
180 190 so to deg C. U can al use a sma layer of baby powder on the bed as ll
we .ll
N le 0.5 /0.6mmozz mm

Produkspesifikasjoner

Merke: Gembird
Kategori: Ikke kategorisert
Modell: 3DP-PLA-FL-01

Trenger du hjelp?

Hvis du trenger hjelp med Gembird 3DP-PLA-FL-01 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Gembird Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer