Hager HIB416M Bruksanvisning
Les nedenfor 📖 manual på norsk for Hager HIB416M (3 sider) i kategorien Bryter. Denne guiden var nyttig for 28 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 14.5 brukere
Side 1/3
6LE007719Aa
HIB4xxM
z
Motorised changeover switch
125A to 630A
Installation and commissioning
Cabinet /
Back Plate
Installation
Step 1
Connecting the
power section
Step 2
COMMAND /
CONTROL terminal
connections
Step 3
Power SUPPLY
terminal
connections
Step 4
Check
Step 5
Emergency
Manual
Operation
Step 6B
Control by
an external
order (AUTO)
Step 6A
Padlocking
Step 6C
Clip for
storage
of the
emergency
handle
6LE007719Aa1
Preliminary operations
Check the following upon delivery and after removal of
the packaging:
• Packaging and contents are in good condition.
• The product reference corresponds to the order.
• Contents should include:
- 1 x motorised changeover switch
- 1 x emergency handle and xing clip
- 1 x quick start instruction sheet
Accessories
• Bridging bars and connection kits
• Terminal shrouds
• Terminal shield
This quick start is intended for personnel trained in the
installation and commissioning of this product. For further
details refer to the product instruction manual available
on the hager website.
• This product must always be installed and
commissioned by qualied and approved personnel.
• Maintenance and servicing operations should be
performed by trained and authorised personnel.
• Do not handle any control or power cables connected
to the product when voltage may be, or may become
present on the product, directly through the mains or
indirectly through external circuits.
• Always use an appropriate voltage detection device to
conrm the absence of voltage.
• Ensure that no metal objects are allowed to fall in the
cabinet (risk of electrical arcing).
Risk of electrocution, burns or injury to
persons and / or damage to equipment.
Risk of damaging the device: In case the
product is dropped or damaged in any way
it is recommended to replace the complete
product.
• For 125 - 160A (Uimp = 8 kV). Terminations must
respect a minimum of 8 mm clearance from live parts
to parts intended to be earthed and between poles.
• For 200 - 630A (Uimp = 12 kV). Terminations must
respect a minimum of 14 mm clearance from live parts
to parts intended to be earthed and between poles.
Failure to observe good enginering practises as well as
to follow these safety instructions may expose the user
and others to serious injury or death.
Produkspesifikasjoner
| Merke: | Hager |
| Kategori: | Bryter |
| Modell: | HIB416M |
Trenger du hjelp?
Hvis du trenger hjelp med Hager HIB416M still et spørsmål nedenfor, og andre brukere vil svare deg
Bryter Hager Manualer
3 April 2025
3 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
1 April 2025
7 Februar 2025
7 Februar 2025
2 Januar 2025
Bryter Manualer
- Fantini Cosmi
- Leviton
- Berker
- DoorBird
- Muller
- Vivotek
- Logilink
- Metra
- PCE
- IOGEAR
- Robbe
- Doepke
- Sonance
- IPGARD
- INOGENI
Nyeste Bryter Manualer
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
9 Oktober 2025
8 Oktober 2025
8 Oktober 2025
7 Oktober 2025
6 Oktober 2025
6 Oktober 2025
6 Oktober 2025