Horizon Fitness Speedbike IC5.0 Bruksanvisning

Horizon Fitness Sykkeltrener Speedbike IC5.0

Les nedenfor 📖 manual på norsk for Horizon Fitness Speedbike IC5.0 (31 sider) i kategorien Sykkeltrener. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/31
INDOOR CYCLE OWNERS MANUAL
INDOOR CYCLE-BENUTZERHANDBUCH
GEBRUIKERSHANDLEIDING INDOOR-FIETS
MANUEL D’UTILISATION DU VÉLO D’APPARTEMENT
2 3
3 ENGLISH
17 DEUTSCH
31 NEDERLANDS
45 FRANÇAIS
ASSEMBLY
There are several areas during the assembly process that special attention must be paid. It is very important to follow the
assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed
correctly, the indoor cycle could have parts that are not tightened and will seem loose and may cause irritating noises. To
prevent damage to the indoor cycle, the assembly instructions must be reviewed and corrective actions should be taken.
Before proceeding, find your indoor cycle’s serial number located on
the front stabilizer of the cycle and enter it in the space provided below.
ENTER YOUR SERIAL NUMBER IN THE BOX BELOW:
» Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
» Be sure to enter both the SERIAL NUMBER and MODEL NAME on your warranty card.
SERIAL NUMBER:
MODEL NAME:
HORIZON INDOOR CYCLE
WARNING
36
ENGLISH
4 5
MAIN PARTS INCLUDED:
Main Frame (20)
Front Stabilizer (21F)
Rear Stabilizer (21R)
Handlebar Set (22)
Handlebar Post (23)
Console (29)
Pedal Set (34 L&R)
Seat Post Set (31, 32 & 33)
PARTS PACKING
INCLUDED:
1 Hardware Kit
HARDWARE KIT:
Tablet holder
Console (29)
Handlebar adjustment knob (24)
Emergency brake
Flywheel
Water bottle holder (30)
Transport wheels
Stabilizer (21F)
Pedals (34 L&R)
Stabilizer (21R)
Crank arms (35 L&R)
Seat slider (33)
Seat height knob
Seat adjustment lever (31)
Seat (32)
Handlebar set (22)
Handlebar post (23)
Main frame (20)
MODEL INFORMATION
PRE ASSEMBLY
UNPACKING
Due to the weight of the indoor cycle, it is recommended that two people
perform the assembly. Unpack the product where you will be using it. It is
recommended that you place a protective covering on your floor. Place the carton
on a level flat surface and remove all packing materials; do not dispose of the
packing materials until assembly is completed.
NOTE: During each assembly step, ensure that ALL nuts and bolts are in place
and partially threaded in before completely tightening any ONE bolt.
NOTE: A light application of grease may aid in the installation of hardware. Any
grease, such as lithium bike grease is recommended.
NEED HELP?
ENGLISH
ENGLISH
Leveling Feet
If you have questions or if there are any missing
parts, contact Customer Tech Support.
1
Bolt
M8
Qty: 7
2
Spring Washer
Ø8.2
Qty: 7
4
Bolt
M4
Qty: 3
5
Flat Washer
Ø10
Qty: 1
3
Flat Washer
Ø8.2
Qty: 7
Tool Kit
5mm Wrench
13/15mm Wrench
Screwdriver

Produkspesifikasjoner

Merke: Horizon Fitness
Kategori: Sykkeltrener
Modell: Speedbike IC5.0

Trenger du hjelp?

Hvis du trenger hjelp med Horizon Fitness Speedbike IC5.0 still et spørsmål nedenfor, og andre brukere vil svare deg




Sykkeltrener Horizon Fitness Manualer

Sykkeltrener Manualer

Nyeste Sykkeltrener Manualer