Jung GCRFTR231PL Bruksanvisning

Jung Ikke kategorisert GCRFTR231PL

Les nedenfor 📖 manual på norsk for Jung GCRFTR231PL (6 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 12 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 6.5 brukere

Side 1/6
Temperature Management Floor heating controller
Ref.-no.: ..FTR 231 ..
Operating Instructions
Floor heating controller
1. Area of application
systems and temperature control systems.
2. Function
The floor heating controller consists of two parts:
Control unit for setting the required floor temperature
Remote sensor in the floor for monitoring the set temperature
Control unit:
Using the setting knob, set the required temperature for your floor. The
numbers  – 6 on the knob correspond to a temperature range of 10 – 50
°C.
Note the setting instructions from the manufacturer of your floor heating
system.
If the temperature in the floor falls below the temperature you have set,
the control unit requests heat; this state is displayed by the red LED
above the setting knob. You can therefore see if your heating is using
energy.
A range restriction can also be carried out in the setting knob.
The operating state of your floor heating is switched on or off with the
mains switch 0 – I.
You also have the option of programming a temperature reduction via an
external time switch e.g. during the night.
If you have installed this type of time switch, the temperature reduction is
indicated by the green LED above the setting knob. The temperature
reduction is approx. 5 °C.
Example: The temperature set by you on the control unit is 34 °C
(number on dial = 4). This means that the temperature in the floor e.g.
during the night can drop down to 29 °C without your heating switching
itself on.
Stand: Apr-08 240 9090 1

Produkspesifikasjoner

Merke: Jung
Kategori: Ikke kategorisert
Modell: GCRFTR231PL

Trenger du hjelp?

Hvis du trenger hjelp med Jung GCRFTR231PL still et spørsmål nedenfor, og andre brukere vil svare deg