Jung WS10D Bruksanvisning

Les nedenfor 📖 manual på norsk for Jung WS10D (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 24 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 12.5 brukere

Side 1/3
KNX Sensoren
Art.-no.: WS 10 D, WS 10 T, WS 10 H
Operating Instructions
Brightness Sensor, Temperature Sensor
Twilight sensor
2. Safety instructions ............................................................................ 1
4. Fitting instructions............................................................................ 2
6. Acceptance of guarantee.................................................................. 3
1. Function
The climatic data of interest are collected by three different transducers,
ie. the brightness sensor, the twilight sensor (Fig. ) and the temperature
sensor (Fig. ) and converted into analogue voltage signals (0 – 10 V).
The evaluation of these signals requires additional electronics (e.g.
instabus weather station) which offers the capability of transmitting
measured value or instruction telegrams to the EIB instabus depending
on the analogue signals received. To prevent the formation of moisture
inside the housings, the sensors are equipped with pressure-
compensating elements (weatherproofing membrane).
2. Safety instructions
Attention: Electrical equipment must be installed and fitted by
qualified electricians only.
Subject to change without notice.
3. Connection
The connecting cables passes through the screwed conduit entry no. 7 to
the connecting terminals.
Stand: Okt-07 825 060 03

Produkspesifikasjoner

Merke: Jung
Kategori: Ikke kategorisert
Modell: WS10D

Trenger du hjelp?

Hvis du trenger hjelp med Jung WS10D still et spørsmål nedenfor, og andre brukere vil svare deg