Kohler K-8807 Bruksanvisning

Les nedenfor 📖 manual på norsk for Kohler K-8807 (9 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 13 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/9
Installation Guide
Sink Strainer
Mproduct numbers are for Mexico (i.e. K-12345 )M
Los números de productos seguidos de
Mcorresponden a México (Ej.
K-12345 )M
Français, page “Français-1”
Español, página “Español-1”
K-8807
Tools and Materials
Before You Begin
Observe all local plumbing and building codes.
Shut off the main water supply.
Carefully inspect waste and supply tubing for any sign of
damage.
Replace waste or supply tubing if necessary.
Install the faucet according to the instructions packed with the
faucet.
Kohler Co. reserves the right to make revisions in the design of
products without notice, as specified within the Price Book.
Adjustable
Wrench
Various
Screwdrivers
Plumbers
Putty
112446-2-BD 2 Kohler Co.
1. Install the Strainer
Apply a ring of plumbers putty or other sealant to the underside
edge of the drain body flange or strainer body flange.
Insert the drain or strainer body in the sink.
Assemble a gasket, plate, and nut to the drain body from under
the sink.
Wrench tighten.
NOTE: Do not reposition the drain after the locknut has been
tightened.
Align the wide end of the tailpiece with the drain or strainer
body, slide the nut onto the tailpiece, and thread the nut to the
drain or strainer body.
Position the trap on the end of the tailpiece.
If necessary, cut the tailpiece to ensure proper fit.
Securely tighten the nut.
Insert strainer plate into strainer.
Strainer Plate
Body
Plumbers Putty
Gasket
Plate
Nut
Washer
Tailpiece
Nut
Kohler Co. 3 112446-2-BD

Produkspesifikasjoner

Merke: Kohler
Kategori: Ikke kategorisert
Modell: K-8807

Trenger du hjelp?

Hvis du trenger hjelp med Kohler K-8807 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Kohler Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer