Könner & Söhnen KS CS1800-14 Bruksanvisning
Könner & Söhnen
sag
KS CS1800-14
Les nedenfor 📖 manual på norsk for Könner & Söhnen KS CS1800-14 (21 sider) i kategorien sag. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/21
Owner’s Manual
KS CS1800-14
KS CS2200-16
KS CS2400-18
Electric chainsaw
Please, read this manual
carefully before use!
EN
INTRODUCTION
IMPORTANT SAFETY INFORMATION
1
Thank you for opting for Könner & Söhnen
®
products. This manual contains a brief description of safety,
setup and use. More information can be found on the official importer’s website in the support section:
konner-sohnen.com/manuals
You can also go to the support section and download the manual by scanning the QR code or on thewebsite
of the official importer of Könner & Söhnen
®
at www.konner-sohnen.com
WORK AREAWORK AREA
• Keep the work area clean and well lit. Cluttered and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of ammable liquids,
gases or dust. Power tools create sparks, which may ignite the dust or fumes.
• Keep children or unauthorized individuals away from the work area, while working with power tools.
Distractions can cause you to lose control.
ELECTRICAL SAFETYELECTRICAL SAFETY
Failure to follow the recommendations marked with this
sign may lead to serious injury or death of the operator
or third parties.
Useful information while operating the machine.
ATTENTION – DANGER!
Read all instructions failure to follow all instructions listed
below may result in electric shock, re and /or serious
injury.
ATTENTION – DANGER!
IMPORTANT!
Please, read this manual Please, read this manual
carefully before use!carefully before use!
The manufacturer of Könner & Söhnen
®
products reserves the right to make changes that may not be
reected in this manual, namely:
- The manufacturer reserves the right to make changes in the product design, conguration and construction.
- The images and drawings in this manual are for reference only and may dier from the actual components
and inscriptions on the products.
Contact information that you are free to use in case of any problems can be found at the end of this
manual. All information in this manual is correct to the best of our knowledge and belief at the date
of its publication. The current list of service centers can be found on the ocial importer’s website at
www.konner-sohnen.com
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body is earthed or grounded surfaces.
Packaging materials are not toys! Children must not play
with plastic bags! Danger of suffocation!
WARNING!
Always check that the power supply corresponds to the
voltage on the rating plate.
WARNING!
konner-sohnen.com | 1
CHAIN SAW SAFETY WARNINGS
2
• Do not store or use power tools in wet conditions (rain, snow). Water entering a power tool will increase
the risk of electric shock.
• Never use the cord to carry the tool, and do not pull the cord when disconnecting the power tool. Keep
the cord away from heat, oil and sharp edges or moving parts. Damaged or entangled cords increase the
risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
PERSONAL SAFETYPERSONAL SAFETY
• Do not operate tool when you are tired or under the inuence of drugs, alcohol or medication.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection will reduce personal injuries.
• Avoid accidental starting. Ensure the switch is in the o position before plugging in.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
• Do not wear loose clothing or jewellery; Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
POWER TOOL USE AND CAREPOWER TOOL USE AND CARE
• Do not use the power tool if the switch does not turn it on and o. Any power tool that cannot be con-
trolled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source before making any adjustments, changing accessories, or
storing power tools.
• Store idle power tools out of the reach of children.
• Maintain power tools.
• Keep cutting tools sharp and clean.
• Before you start the chain saw, make sure the saw chain is not contacting anything.
• Hold the power tool by insulated gripping surfaces only.
• Always hold the chain saw with your right hand on the rear handle and your left hand on the front handle.
• Wear safety glasses and hearing protection. It is advisable to wear protective, close-fitting footwear and
clothing.
• Do not operate a chain saw on a tree. Operation of a chain saw while up in a tree may result in personal
injury.
• Use the power tool on a level surface. Do not use it while standing on a ladder or on a slippery surface.
• Use extreme caution when cutting brush and saplings. Thin material can get into the chainsaw chain,
potentially causing imbalance.
• Carry the chain saw by the front handle with the chain saw switched o and away from your body. When
transporting or storing the chain saw, always t the guide bar cover.
• Follow instructions for lubricating, chain tensioning and changing accessories. Improperly tensioned or
lubricated chain may either break or increase the chance for kickback.
• Keep handles dry, clean, and free from oil and grease.
• Use the saw for cutting wood only. For example: do not use chain saw for cutting plastic, or non-wood
building materials.
CAUSES AND OPERATOR PREVENTION OF KICKBACK
3
KICKBACK KICKBACK
Kickback may occur when the nose or tip of the guide bar touches an object, or when the woodcloses in and
pinches the saw chain in the cut. Such dangerous kickbacks can largely be avoided by working quietly and
with forethought in the following manner:
konner-sohnen.com | 2
Produkspesifikasjoner
| Merke: | Könner & Söhnen |
| Kategori: | sag |
| Modell: | KS CS1800-14 |
Trenger du hjelp?
Hvis du trenger hjelp med Könner & Söhnen KS CS1800-14 still et spørsmål nedenfor, og andre brukere vil svare deg
sag Könner & Söhnen Manualer
21 September 2025
20 September 2025
20 September 2025
19 September 2025
sag Manualer
- sag MSW
- sag DeWalt
- sag AEG
- sag Rikon
- sag Best
- sag Stihl
- sag SereneLife
- sag Festo
- sag Toolcraft
- sag Gude
- sag Ryobi
- sag RIDGID
- sag Flex
- sag Hitachi
- sag Max
- sag Milwaukee
- sag Makita
- sag Einhell
- sag Fuxtec
- sag Metabo
- sag Vonroc
- sag Worx
- sag Dedra
- sag Stanley
- sag Ozito
- sag Craftsman
- sag Hilti
- sag Fieldmann
- sag Biltema
- sag Hikoki
- sag Ideal
- sag Parkside
- sag Maestro
- sag Graphite
- sag Sun Joe
- sag Black Decker
- sag Remington
- sag Zipper
- sag Kress
- sag Stiga
- sag Trotec
- sag Scheppach
- sag Festool
- sag Troy-Bilt
- sag Laguna
Nyeste sag Manualer
20 September 2025
20 September 2025
20 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025