Könner & Söhnen KS CS21G-13 Bruksanvisning
Könner & Söhnen
sag
KS CS21G-13
Les nedenfor 📖 manual på norsk for Könner & Söhnen KS CS21G-13 (21 sider) i kategorien sag. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/21
Owner’s Manual
KS CS21G
KS CS31G
Gasoline chainsaw
Please, read this manual
carefully before use!
EN
The chainsaw model KS CS21G can be equipped with a bar and chain of your choice.
The models KS CS21G-13, KS CS21G-16, KS CS21G-16-1 are modifications of the base
model KS CS21G with the selected bar length and manufacturer chosen at the time
of order.
The chainsaw model KS CS31G can also be equipped with a bar and chain of your choice.
The models KS CS31G-16, KS CS31G-18, KS CS31G-20, KS CS31G-16-1, KS CS31G-18-1, KS
CS31G-20-1 are modifications of the base model KS CS31G with the selected bar length
and manufacturer chosen at the time of order.
INTRODUCTION
IMPORTANT SAFETY INFORMATION
1
Thank you for opting for Könner & Söhnen
®
products. This manual contains a brief description of safety,
setup and use. More information can be found on the official importer’s website in the support section:
konner-sohnen.com/manuals
You can also go to the support section and download the manual by scanning the QR code or on thewebsite
of the official importer of Könner & Söhnen
®
at www.konner-sohnen.com
WORK AREAWORK AREA
• Keep the work area clean and well lit. Cluttered and dark areas invite accidents.
• Do not operate tools in explosive atmospheres, such as in the presence of ammable liquids, gases or
dust.
• Keep children or unauthorized individuals away from the work area, while working with tools. Distractions
can cause you to lose control.
PERSONAL SAFETYPERSONAL SAFETY
• Do not operate tool when you are tired or under the inuence of drugs, alcohol or medication.
• Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection will reduce personal injuries.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power
tool in unexpected situations.
Failure to follow the recommendations marked with this
sign may lead to serious injury or death of the operator
or third parties.
Useful information while operating the machine.
ATTENTION – DANGER!
Read all instructions failure to follow all instructions listed
below may result in re and /or serious injury.
ATTENTION – DANGER!
IMPORTANT!
Please, read this manual Please, read this manual
carefully before use!carefully before use!
The manufacturer of Könner & Söhnen
®
products reserves the right to make changes that may not be
reected in this manual, namely:
- The manufacturer reserves the right to make changes in the product design, conguration and construction.
- The images and drawings in this manual are for reference only and may dier from the actual components
and inscriptions on the products.
Contact information that you are free to use in case of any problems can be found at the end of this
manual. All information in this manual is correct to the best of our knowledge and belief at the date
of its publication. The current list of service centers can be found on the ocial importer’s website at
www.konner-sohnen.com
Packaging materials are not toys! Children must not play
with plastic bags! Danger of suffocation!
WARNING!
konner-sohnen.com | 1
CHAIN SAW SAFETY WARNINGS
2
• Do not wear loose clothing or jewellery; Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
• Never start or run the chainsaw in an enclosed area. The exhaust fumes contain Carbon.
• Never touch the cover, guide bar, saw chain or nut with bare hands
while the engine is in operation or immediately after shutting down
the engine (fig. 1). Doing so could result in serious burns because
of high temperature.
• Before you start the chain saw, make sure the saw chain is not con-
tacting anything.
• Always hold the chain saw with your right hand on the rear handle
and your left hand on the front handle.
• Do not operate a chain saw on a tree. Operation of a chain saw while
up in a tree may result in personal injury.
1. Cover
2. Guide bar
Fig. 1
3. Saw chain
4. Nut
1
2
3
4
• Use the tool on a level surface. Do not use it while standing on a ladder or on a slippery surface.
• Use extreme caution when cutting brush and saplings. Thin material can get into the chainsaw chain,
potentially causing imbalance.
• Follow instructions for lubricating, chain tensioning and changing accessories. Improperly tensioned or
lubricated chain may either break or increase the chance for kickback.
• Keep handles dry, clean, and free from oil and grease.
• Check for fuel leaks and tighten any loose fasteners.
FUELING SAFETYFUELING SAFETY
• Mix and pour fuel outdoors in areas free of sparks and flames. Use a container designed for fuel storage.
• Do not smoke or allow smoking near fuel or the chainsaw while in use.
• Wipe up all fuel spills before starting the chainsaw.
• Move 10 feet away from the fuel before starting the chainsaw.
• Stop the engine before removing the fuel tank cap.
MAINTENANCE SAFETYMAINTENANCE SAFETY
• Disconnect spark plug before performing maintenance.
TRANSPORT AND STORAGE SAFETYTRANSPORT AND STORAGE SAFETY
• Allow the engine to cool, empty the fuel tank, cover the chain with the scabbard, and secure the saw
before storing or transporting in a vehicle.
• Empty the fuel tank before storing the saw. Store the saw and fuel in places where fuel vapors cannot
reach sparks or open flames from appliances or electrical switches/engines.
• In case of long-term storage of the chainsaw, clean the fuel tank after emptying it. Then start the engine
and empty the carburetor of fuel.
CAUSES AND OPERATOR PREVENTION OF KICKBACK
3
KICKBACK KICKBACK
The saw can kick back if the tip of the guide bar (especially the upper quarter) accidentally touches wood
or any other hard objects. In this case, the saw will move uncontrollably (risk of injury!). Such dangerous
kickbacks can largely be avoided by working quietly and with forethought in the following manner:
• While sawing, always watch the guide-bar nose
• Never attempt to cut with the nose of the guide bar.
• Take care when cutting thin and springy branches.
Particular care must be taken when inserting the into an already started cut.
konner-sohnen.com | 2
Produkspesifikasjoner
| Merke: | Könner & Söhnen |
| Kategori: | sag |
| Modell: | KS CS21G-13 |
Trenger du hjelp?
Hvis du trenger hjelp med Könner & Söhnen KS CS21G-13 still et spørsmål nedenfor, og andre brukere vil svare deg
sag Könner & Söhnen Manualer
19 September 2025
sag Manualer
- sag MSW
- sag DeWalt
- sag AEG
- sag Rikon
- sag Best
- sag Stihl
- sag SereneLife
- sag Festo
- sag Toolcraft
- sag Gude
- sag Ryobi
- sag RIDGID
- sag Flex
- sag Hitachi
- sag Max
- sag Milwaukee
- sag Makita
- sag Einhell
- sag Fuxtec
- sag Metabo
- sag Vonroc
- sag Worx
- sag Dedra
- sag Stanley
- sag Ozito
- sag Craftsman
- sag Hilti
- sag Fieldmann
- sag Biltema
- sag Hikoki
- sag Ideal
- sag Parkside
- sag Maestro
- sag Graphite
- sag Sun Joe
- sag Black Decker
- sag Remington
- sag Zipper
- sag Kress
- sag Stiga
- sag Trotec
- sag Scheppach
- sag Festool
- sag Troy-Bilt
- sag Laguna
Nyeste sag Manualer
20 September 2025
20 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025
19 September 2025