Kramer VP-8X8 Bruksanvisning
Kramer
Ikke kategorisert
VP-8X8
Les nedenfor 📖 manual på norsk for Kramer VP-8X8 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 24 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 12.5 brukere
Side 1/2
VP-8X8 Quick Start
P/N:
2 9 0 0 - 3 0 1 2 5 8 QS
Rev:
3
Scan for full manual
VP-8X8 Quick Start Guide
This guide helps you install and use your VP-8X8 for the first time.
Go to www.kramerav.com/downloads/VP-8X8 to download the latest user manual and check if firmware
upgrades are available.
Step 1: Check in the bwhat’s ox
VP-8X8 Matrix Switcher
1 Set of rack ears
4 Rubber feet
Kramer Infrared Remote Control RC-IR3
Transmitter (with battery and user manual)
1 Power cord
1 Quick start guide
1 Null-modem adapter
Step 2: Get to know your - VP 8X8
#
Feature
Function
1
IR Receiver
The yellow LED is illuminated when receiving signals from the infrared remote control
transmitter
2
POWER Switch
Illuminated switch for turning the unit ON or OFF
3
IN SELECTOR Buttons
Select the input to switch to the output.
When a signal is detected, the input button illuminates in green
4
OUT SELECTOR Buttons
Select the output to which the input is switched
5
ALL Button
Pressing ALL followed by an INPUT button, connects that input to all outputs
For example, press ALL and then Input button # 2 to connect input # 2 to all the outputs
6
OFF Button
Press an OUT SELECTOR button and then an OFF button to disconnect that output from the
inputs.
Press the ALL button and then the OFF button to disconnect all the outputs
7
TAKE Button
Pressing toggles the mode between the Conrm mode and the At Once mode (user TAKE
conrmation per action is unnecessary)
When in the Conrm mode, the TAKE button illuminates
8
STO (Store) Button
Pressing followed by an input/output button stores the current setting STO
For example, press STO and then the Output button # 3 to store in Setup # 3
9
RCL ( ) ButtonRecall
Pressing the button and the corresponding / button recalls a setup from the non-RCL IN OUT
volatile memory. The stored status ashes. Pressing a dierent / button lets you view IN OUT
another setup. After making your choice, pressing the button again implements the new RCL
status
10
LOCK Button
Disengages the front panel switches
11
STATUS 7-segment
Display
Displays the selected input switched to the output (marked above each input)
Also displays the number of IN and OUT ports, the rmware version number, and the
MACHINE #.
12
15-pin HD INPUT
Connectors
Connect to the video sources (from 1 to 8)
Produkspesifikasjoner
| Merke: | Kramer |
| Kategori: | Ikke kategorisert |
| Modell: | VP-8X8 |
Trenger du hjelp?
Hvis du trenger hjelp med Kramer VP-8X8 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Kramer Manualer
21 August 2025
21 August 2025
20 August 2025
20 August 2025
20 August 2025
19 August 2025
5 August 2025
21 Februar 2025
2 Februar 2025
4 Januar 2025
Ikke kategorisert Manualer
- CaterRacks
- Manhattan
- Hanseatic
- SAVS
- 8BitDo
- OnTruss
- AGM
- Absco
- XCell
- Maxxmee
- STANDARD
- Gardebruk
- ETON
- IOptron
- Master
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025