Lastolite Studio Cubelite Bruksanvisning
Lastolite
Annet kameratilbehør
Studio Cubelite
Les nedenfor 📖 manual på norsk for Lastolite Studio Cubelite (3 sider) i kategorien Annet kameratilbehør. Denne guiden var nyttig for 16 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 8.5 brukere
Side 1/3
To set up the Cubelite system for the first time the
procedure is as follows:
1. Lay each item on the floor. You should have:
1. 1 x Cubelite
2. 1 x Tungsten Light
3. 1 x 500w bulb
4. 1 x Light stand
5. 1 x Silver/white reflector
6. 1 x White background
7. 2 x Metal clips
8. 1 x Carry case
2. Remove the Cubelite from it’s blue circular carry case.
3. Let it spring open to form a rounded square shape.
4. Open it out to form a right angle shape.
5. Pull the middle section out diagonally and manouver
the steel to form the cube shape. It should spring into
shape.
6. Give the whole cube a shake if it doesn’t spring into
shape.
7. Place the Cubelite onto your table or chosen work
surface.
8. Remove the front panel and store if not required.
9. Remove the background from the tube.
10. Attach inside the Cubelite using the sewn in elastic
loops and the 2 x clips provided.
11. Remove the stand from box.
12. Pull out the three legs to form a tripod structure, lock
them in place and stand it up
13. Remove the protective plastic moulding from the top.
14. Remove light unit from box.
15. Attach light to the top of the stand and tighten the
knob to secure. DO NOT plug the light in yet.
16. Remove bulb from box.
17. Screw into the light unit. DO NOT plug the light in yet.
18. Position the lamp approx’ 18 inches from the
Cubelite.
19. R
emove the reflector from it’s packaging.
20. Al
low to spring open forming a rounded square
shape.
21. Position the reflector inside the Cubelite on the
opposite side to the light.
22. The Cubelite is now ready to take your first image.
23. Position the products to be photographed inside the
Cubelite to your liking.
24. P
osi
tion y
our camer
a and tripod and frame the shot in
your viewfinder or LCD monitor.
25. Position the light to your liking, plug it into the wall
socket and switch it on.
26. Manouver the reflector until you are happy with the
lighting and shadows and then take the shot.
Setting up your Cubelite
1
1
2 3
4 5 6
7 8 9
10 11 12
13 14 15
16 17 18
19 20 21
22 23 24
25 26
6
5
3
2
4
A
Produkspesifikasjoner
| Merke: | Lastolite |
| Kategori: | Annet kameratilbehør |
| Modell: | Studio Cubelite |
Trenger du hjelp?
Hvis du trenger hjelp med Lastolite Studio Cubelite still et spørsmål nedenfor, og andre brukere vil svare deg
Annet kameratilbehør Lastolite Manualer
18 Januar 2025
18 Januar 2025
18 Januar 2025
17 Januar 2025
Annet kameratilbehør Manualer
Nyeste Annet kameratilbehør Manualer
3 Oktober 2025
15 September 2025
31 August 2025
6 August 2025
4 August 2025
2 April 2025
25 Februar 2025
31 Desember 2025
27 Desember 2024
23 Desember 2024