M-Audio BX3 Bruksanvisning

M-Audio skjerm BX3

Les nedenfor 📖 manual på norsk for M-Audio BX3 (28 sider) i kategorien skjerm. Denne guiden var nyttig for 3 personer og ble vurdert med 4.6 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/28

User Guide

English ( 2 – 6 )

Guía del usuario

Español ( 7 – 11 )

Guide d’utilisation

Français ( 12 – 16 )

Guida per l’uso

Italiano ( 17 – 21 )

Benutzerhandbuch

Deutsch ( 22 – 26 )

Appendix

English ( 27 )

User Guide (English)

Introduction

Box Contents

BX3 BT Speakers (Stereo Pair)

Foam Feet

2-Prong IEC Power Cable

1/8” TS Speaker Interconnect Cable

1/8” to 1/8” TRS Aux Cable

1/8” TRS to RCA Cable

User Guide

Safety & Warranty Manual

Product Registration and Support

To download your included software, follow the instructions below:

1. Visit m-audio.com/softwaredownload.

2. Follow the on-screen instructions to register your product.

3. Upon successful registration, any applicable software downloads, product codes

and promotions will show in your account.

Note: A high-speed internet connection is recommended. If you need assistance, do not

return your product to the dealer. Instead, please contact our helpful technical support team

by visiting m-audio.com/support.

Setup

The configuration and placement of your BX3 BT monitors on speaker stands or your desktop

workstation may affect the performance of the speakers. Use the following tips to achieve the

best performance out of your BX3 BT monitors.

Tip: If possible, place your BX3 BT monitors on speaker stands instead of your desktop.

Desks tend to resonate sympathetically at low frequencies and may adversely affect the bass

response of your monitors. If speaker stands are not possible due to space restrictions and

you notice a buildup in bass, try placing the monitors on isolation pads to acoustically de-

couple the monitors from the desk.

Precautions

• Correct Power Operation: Since the BX3 BT contains amplifiers, it must be connected

to a power outlet. Before connecting power, please make sure that the Vol/Power knob

is set to the off position.

• Standby Mode: BX3 BT includes a Standby Mode to conserve energy used when

powered on but not in use for 25 minutes. To wake from Standby Mode, simply begin

playing audio at any level for 3-5 seconds and BX3 BT will resume normal functionality.

• Foam Feet: In order to maximize physical stability, we recommend you use the provided

foam feet on the bottoms of the BX3 BT monitors.

• Connecting to a Computer Sound Card or Other Audio Output Device: Your BX3 BT

speakers have a variety of inputs for use with a multitude of devices. Before connecting

the BX3 BT speakers, make sure the power from the computer or other output device has

been turned off and the BX3 BT speakers are also turned off. Connect the RCA or 1/4"

(6.35 mm) input jacks to the corresponding output connectors of a computer sound card,

portable music player, etc. You can also use the included 1/8" (3.5 mm) TRS stereo aux

cable to connect a secondary audio device to the Aux input on the front of the BX3 BT or

connect via Bluetooth

Produkspesifikasjoner

Merke:	M-Audio
Kategori:	skjerm
Modell:	BX3
Vekt:	3350 g
Bredde:	140 mm
Dybde:	145 mm
Høyde:	208 mm
Bluetooth:	Nei
Tilkoblingsteknologi:	Koblet med ledninger (ikke trådløs)
Strømkildetype:	AC
Hodetelefonutganger:	1
Anbefalt bruk:	Universell
Høyttalerplassering:	Bord bokhylle
Peak Music Power Output (PMPO):	120 W
AC-inngangsspenning:	100-240 V
AC-inngangsfrekvens:	50 - 60 Hz
Produktfarge:	Sort
Hodetelefontilkobling:	3,5 mm
Kabler inkludert:	AC, Audio (3.5mm)
Strømforbruk (vanlig bruk):	85 W
Strøminngang/AC (strøm) inn:	Ja
AUX-inngang:	Ja
Kroppsmateriale:	MDF
Lyd-utgang kanaler:	- kanaler
RMS-rangert strøm/utgangseffekt:	50 W
Frekvensrekkevidde:	80 - 22000 Hz
3,5 mm inn:	Ja
6,35 mm (1/4 tommer) inngang:	2