M-Audio BX4 Bruksanvisning

M-Audio skjerm BX4

Les nedenfor 📖 manual på norsk for M-Audio BX4 (28 sider) i kategorien skjerm. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 1.5 brukere

Last ned PDF

Side 1/28

User Guide

English ( 2 – 6 )

Guía del usuario

Español ( 7 – 11 )

Guide d’utilisation

Français ( 12 – 16 )

Guida per l’uso

Italiano ( 17 – 21 )

Benutzerhandbuch

Deutsch ( 22 – 26 )

Appendix

English ( 27 )

User Guide (English)

Introduction

Box Contents

BX4 BT Speakers (Stereo Pair)

Foam Feet

2-Prong IEC Power Cable

1/8” TS Speaker Interconnect Cable

1/8” to 1/8” TRS Aux Cable

1/8” TRS to RCA Cable

User Guide

Safety & Warranty Manual

Product Registration and Support

To download your included software, follow the instructions below:

1. Visit m-audio.com/softwaredownload.

2. Follow the on-screen instructions to register your product.

3. Upon successful registration, any applicable software downloads, product codes

and promotions will show in your account.

Note: A high-speed internet connection is recommended. If you need assistance, do not

return your product to the dealer. Instead, please contact our helpful technical support team

by visiting m-audio.com/support.

Setup

The configuration and placement of your BX4 BT monitors on speaker stands or your desktop

workstation may affect the performance of the speakers. Use the following tips to achieve the best

performance out of your BX4 BT monitors.

Tip: If possible, place your BX4 BT monitors on speaker stands instead of your desktop. Desks tend

to resonate sympathetically at low frequencies and may adversely affect the bass response of your

monitors. If speaker stands are not possible due to space restrictions and you notice a buildup in

bass, try placing the monitors on isolation pads to acoustically de-couple the monitors from the

desk.

Precautions

• Correct Power Operation: Since the BX4 BT contains amplifiers, it must be connected to a

power outlet. Before connecting power, please make sure that the Vol/Power knob is set to

the off position.

• Standby Mode: BX4 BT includes a Standby Mode to conserve energy used when powered on

but not in use for 25 minutes. To wake from Standby Mode, simply begin playing audio at any

level for 3-5 seconds and BX4 BT will resume normal functionality.

• Foam Feet: In order to maximize physical stability, we recommend you use the provided foam

feet on the bottoms of the BX4 BT monitors.

• Connecting to a Computer Sound Card or Other Audio Output Device: Your BX4 BT

speakers have a variety of inputs for use with a multitude of devices. Before connecting the

BX4 BT speakers, make sure the power from the computer or other output device has been

turned off and the BX4 BT speakers are also turned off. Connect the RCA or 1/4" (6.35 mm)

input jacks to the corresponding output connectors of a computer sound card, portable music

player, etc. You can also use the included 1/8" (3.5 mm) TRS stereo aux cable to connect a

secondary audio device to the Aux input on the front of the BX4 BT or connect via Bluetooth

Produkspesifikasjoner

Merke:	M-Audio
Kategori:	skjerm
Modell:	BX4
Vekt:	4460 g
Bredde:	156 mm
Dybde:	175 mm
Høyde:	225 mm
Bluetooth:	Nei
Tilkoblingsteknologi:	Koblet med ledninger (ikke trådløs)
Strømkildetype:	AC
Hodetelefonutganger:	1
Anbefalt bruk:	Universell
Høyttalerplassering:	Bord bokhylle
Peak Music Power Output (PMPO):	120 W
AC-inngangsspenning:	100-240 V
AC-inngangsfrekvens:	50 - 60 Hz
Produktfarge:	Sort
Hodetelefontilkobling:	3,5 mm
Kabler inkludert:	AC, Audio (3.5mm)
Strømforbruk (vanlig bruk):	85 W
Strøminngang/AC (strøm) inn:	Ja
AUX-inngang:	Ja
Kroppsmateriale:	MDF
Lyd-utgang kanaler:	- kanaler
RMS-rangert strøm/utgangseffekt:	50 W
Frekvensrekkevidde:	69 - 22000 Hz
3,5 mm inn:	Ja
6,35 mm (1/4 tommer) inngang:	2