Makita BCV03 Bruksanvisning

Les nedenfor 📖 manual på norsk for Makita BCV03 (18 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 23 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/18
BG
Акумулаторен
преобразувател
Упътване за работа
HR Adapter za akumulator Upute za korištenje
MK Конвертер на батерии Упатство за работа
RO Transformator cu baterii Manual de instrucţiuni
RS Батеријски конвертор Упутство за употребу
RUS
Аккумуляторный
Преобразователь Тока
Инструкция по
эксплуатации
UA Адаптер для акумуляторів
Інструкція з
експлуатації
CS
电池转换器
使用说明书
CT
KR
배터리 컨버터 사용 설명서
ID Konverter baterai Buku Petunjuk
VI
Bộ chuyển đổi pin Hướng dẫn sử dụng
TH
PR
AR
GB Battery converter Instruction Manual
F
Adaptateur-Transfo Cein-
ture de Batterie
Manuel d’instructions
D Akku-Adapter Gebrauchsanleitung
I Convertitore batteria Istruzioni per l’uso
NL Accudraaghouder Gebruiksaanwijzing
E Convertidor de Baterías Manual de instrucciones
P Conversor de Baterias Manual de instruções
DK Akku-konverter Brugervejledning
GR Μετατροπέας μπαταριών Εγχειρίδιο οδηγιών
TR Batarya dönüştürücü Kullanım Kılavuzu
S Batteriadapter Bruksanvisning
N Batterikonverter Bruksanvisning
FIN Vaihtosuunnin Käyttöohje
LV Akumulatoru pārveidotājs Lietošanas rokasgrāmata
LT Akumuliatoriaus keitiklis Naudojimo instrukcija
EE Akumuundur Kasutusjuhend
PL Konwerter Akumulatorów Instrukcja obsługi
HU Akkumulátor átalakító Használati útmuta
SK Adaptér batérií Návod na obsluhu
CZ Akumulátorový konvertor Návod k použití
SI Baterijski pretvornik Navodila za uporabo
AL Konverter baterie Manual Udhëzimi
BCV03
2
1
1
2
2
4
5
3
6
6
7
9
8
1 2 3
10
11
4
5
12
4 5
3
1 Button
2 Battery cartridge
3 Battery converter
4 Remaining battery
capacity indication
lamp for battery 1
5 Remaining battery
capacity indication
lamp for battery 2
6 Button
7 Battery guard
8 Protrusion
9 Screws
10 Label
11 Battery converter
symbol
12 Battery capacity
display button
English (Original instructions)
Explanation of general view
Applications
This battery converter uses two 18 V batteries, and can be used with 36 V battery-
powered products.
Compatible battery: BL1815N, BL1820, BL1820B, BL1830, BL1830B,
BL1840, BL1840B, BL1850, BL1850B, BL1860B
Note: BL1815 cannot be used with the battery converter.
CAUTION:
Be sure to carefully read the product main unit instruction manual before use.
This battery converter is designed exclusively for use with 18 V batteries. Do not use
14.4 V batteries.
Install two 18 V batteries for use. This battery converter cannot be used with only one
18 V battery.
Do not insert the battery converter into the charger. Charging is not possible in this
case.
Removing or installing batteries and battery converter
CAUTION:
Always switch off the tool before installing or removing of the battery cartridges.
Firmly hold the battery converter and battery cartridges when replacing battery
cartridges.
Failure to rmly hold the battery converter and battery cartridges may damage
them or cause a serious injury.
When replacing battery cartridges with the battery converter installed on the tool,
rmly hold the battery cartridges and the tool.
Firmly hold the tool and battery converter when removing the battery converter. Fail-
ure to rmly hold the tool and the battery converter may drop them and cause dam-
age to them or a serious injury.
Removing/installing the battery cartridges from/on the battery converter
(Fig. 1)
1. To remove battery cartridge from the battery converter, slide it from the battery
converter while sliding the button on the front of the battery cartridge.
2. To install the battery cartridge, align the tongue on the battery cartridge with the
groove in the battery converter and slip it into place. Always insert it all the way until
it locks in place with a little click. If you can see the red indicator on the upper side
of the button, it is not locked completely. Install it fully until the red indicator cannot
be seen. If not, it may accidentally fall out of the battery converter, causing injury to
you or someone around you.
Do not use force when installing the battery cartridge. If the cartridge does not slide
in easily, it is not being inserted correctly.
Removing/installing the battery converter from/on the tool (Fig. 2)
1. To remove the battery converter, slide it from the tool while sliding the button on the
front of the battery converter.
2. To install the battery converter, align the tongue on the battery converter with the
groove in the tool and slip it into place. Always insert it all the way until it locks in
place with a little click. If you can see the red indicator on the upper side of the button,
it is not locked completely. Install it fully until the red indicator cannot be seen. If not,
it may accidentally fall out of the tool, causing injury to you or someone around you.
Do not use force when installing the battery converter. If the battery converter does
not slide in easily, it is not being inserted correctly.
CAUTION:
Be careful not to pinch your ngers when inserting batteries and the battery con-
verter.
How to use this converter with the 36 V cordless brushcutter (Fig. 3)
When using with the above cordless brushcutter, mount the battery guard (optional
accessory).
To install the accessory battery guard, t it over the protrusion of the tool and then
secure it with screws.
To remove the accessory battery guard, unscrew and slide it off.
How to use this converter with the chain saw Model BUC250, UC250D
(Fig. 4)
Note:
Model BUC250, UC250D only with a label including the battery converter symbol
shown in the gure can be used with this converter.

Produkspesifikasjoner

Merke: Makita
Kategori: Ikke kategorisert
Modell: BCV03

Trenger du hjelp?

Hvis du trenger hjelp med Makita BCV03 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Makita Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer