Metra 82-3024 Bruksanvisning

Les nedenfor 📖 manual på norsk for Metra 82-3024 (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.6 stjerner i gjennomsnitt av 1.5 brukere

Side 1/1
1. Use two (2) screws to secure speaker adaptor bracket
to a stationary surface that can be used as a backup
for drilling (Figure 1).
2. Choose a hole saw to match the opening size for the
tweeter to be installed. Using the in the center dimple
of the bracket as the center for the hole, cut out
opening for the tweeter (Figure 2).
Note: Depending on the application, some tweeters
can be surface mounted to the adaptor bracket without
3. Remove screws and remove bracket from backup
surface.
4. Secure tweeter to adaptor bracket using the method
described and hardware supplied with the tweeter
purchased. Additional drilling may be required.Note:
5. Make connections to vehicle speaker wires and
secure speaker/bracket assembly to location (Figure 3).
Speaker Adaptor Bracket
Tools Required
120 82-3024
Phillips
Screwdriver
Parts
Supplied:
(2) Brackets
Revision 07/14/21
*120823024*
6
It may be necessary to acquire screws to mount the speaker/
bracket assembly to the location.
IMPORTANT
!
Copyright 2021 Crutchfield Corporation
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
FIGURE 3
FIGURE 1
FIGURE 2
Speaker Adaptor Br
Speaker Adaptor Br
Speaker Adaptor Br
Speaker Adaptor Bracket
acket
acket
acketSpeaker Adaptor Bracket
Dimple
Dimple
Dimple
DimpleDimple
Drill &
Hole Saw

Produkspesifikasjoner

Merke: Metra
Kategori: Ikke kategorisert
Modell: 82-3024

Trenger du hjelp?

Hvis du trenger hjelp med Metra 82-3024 still et spørsmål nedenfor, og andre brukere vil svare deg