Metra 95-7021HG Bruksanvisning

Les nedenfor 📖 manual på norsk for Metra 95-7021HG (8 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 8 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/8
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 4/4/24 INST95-7021HG
Attention! With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections are secure before
cycling the ignition to test this product.
I N S TA L L AT I O N I N S T R U C T I O N S
95-7021HG
KIT FEATURES
ISO DDIN radio provision
ISO DIN radio provision with pocket sold separately
Painted gloss black to match factory finish
KIT COMPONENTS
• A) Radio trim panel • B) Radio brackets • C) #6 x 3/8” Phillips screws (4)
TOOLS REQUIRED
• Panel removal toolPhillips screwdriver
• Socket wrench
TABLE OF CONTENTS
Dash Disassembly 2 ..................................................
Kit Assembly .......................................................... 3
WIRING & ANTENNA CONNECTIONS
(sold separately)
Visit metraonline.com for audio/video and
steering wheel control interface options.
Wire harness: 70-7005
Antenna adapter: Not required
A B C
Mitsubishi Outlander (excluding ES models)
2020-2021
Visit for more detailed information about the product and up-to-date vehicle MetraOnline.com
specific applications
386.257.1187
|
MetraOnline.com
2
DASH DISASSEMBLY
1. Unsnap and remove dash panel.
(Figure A)
2. Unscrew (4) Phillips screws and remove
the factory radio. (Figure B)
Continue to Kit Assembly
(Figure B) (Figure A)
REV. 4/4/2024 INST95-7021HG 3
KIT ASSEMBLY
(Figure A) (Figure B)
1. brackets radio trim Attach the to the
panel using the (4) #6 x 3/8" truss head
Phillips screws provided. (Figure A)
2. Slide the radio into the completed
assembly and secure it to the assembly
using screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
4. Reassemble the dash in reverse order
of disassembly.

Produkspesifikasjoner

Merke: Metra
Kategori: Ikke kategorisert
Modell: 95-7021HG

Trenger du hjelp?

Hvis du trenger hjelp med Metra 95-7021HG still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Metra Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer