Metra Axxess ANC-GMH1 Bruksanvisning

Metra Ikke kategorisert Axxess ANC-GMH1

Les nedenfor 📖 manual på norsk for Metra Axxess ANC-GMH1 (14 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 24 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/14
ANC-GMH1
ANC T-Harness Installation
LOC T-Harnesses have vehicle specific applications. Please visit https://axxessinterfaces.com/ for the latest and up-to-
date application information.
Active noise cancellation is an OE module that helps reduce unwanted background noise. Microphones mounted throughout the
vehicles are used to monitor sound levels and frequencies inside the vehicle’s cabin. The factory ANC generates an inverted signal from
the factory speakers to cancel out unwanted cabin noise.
It is recommended that the RPO code is double check to confirm application. The RPO Codes can be found on a placard labeled “Service
Parts Identification” in the glove box, on the trunk floor or inside the driver's door panel.
Things to know
UQA
Date 9-13-23 INSTANC-GMH1
Active Noise Canceling Microphones (ANC)
Important Note: DO NOT PLUG in the ANC bypass into any other factory module other than the location mentioned below.
The Active Noise Cancellation system is operational under the following conditions:
The amplifier has passed all self diagnostic checks
All doors are closed
Battery voltage is between 9.5 V and 16 V
The vehicle cabin temperature is less than 140°F (60°C)
Engine speed is between 550 and 3000 RPM
To bypass the ANC you would need to remove the
trunk carpet or liner and look for a small module
connected to the vehicle's audio system or wiring
harness. However, please note that the exact
location may vary depending on the specific trim
level and options of the Camaro. Simply unplug
the OE connector form the AMP/ANC module
and plug the t-harness inline. Your ANCs have
been bypassed.
2016-2022 CAMARO
ANC Plug Location
RPO Codes: UQ3+NKC, UQA
Active Noise Canceling Microphones (ANC)
Important Note: DO NOT PLUG in the ANC bypass into any other factory module other than the location mentioned below.
The ANC system operates when certain conditions are met:
The amplifier passes self-diagnostic checks.
All doors are closed.
Battery voltage is between 9.5 V and 16 V.
Cabin temperature is below 140°F (60°C).
Engine speed is between 550 and 3000 RPM.
2018-2022 MALIBU, 2017-2020 IMPALA
To bypass the ANC you would need to remove
the trunk carpet and rear passenger panel look
for a small module connected to the vehicle's
audio system or wiring harness. However, please
note that the exact location may vary depending
on the specific trim level and options of the
Malibu. Simply unplug the OE connector form
the AMP/ANC module and plug the t-harness
inline. Your ANCs have been bypassed.
ANC Plug Location
RPO Codes: UQ3, UQA, UQF, UQG, UQS, NKC

Produkspesifikasjoner

Merke: Metra
Kategori: Ikke kategorisert
Modell: Axxess ANC-GMH1

Trenger du hjelp?

Hvis du trenger hjelp med Metra Axxess ANC-GMH1 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Metra Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer