Metra NITO-01 Bruksanvisning

Les nedenfor 📖 manual på norsk for Metra NITO-01 (5 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 3 brukere

Side 1/5
Installation instructions for part NITO-01
REV. 5/17/2017 INSTNITO-01
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
axxessinterfaces.com
metraonline.com
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
Provides accessory power (12-volt 10-amp)
Provides NAV outputs (parking brake,
reverse, and speed sense)
Pre-wired ASWC-1 harness (ASWC-1 sold
separately)
Retains the factory backup camera
Retains the audible parking sensor warning
Retains the factory AUX-IN jack
Used in amplified applications
Adjustable gain control for overall volume
High level speaker input
• Retains balance
Micro “B” USB updatable
INTERFACE FEATURES
Wire cutter • Crimp tool • Solder gun • Tape • Small flat-blade screwdriver
• Connectors (example: butt-connectors, bell caps, etc.)
TOOLS REQUIRED
NITO-01
Nissan Maxima 2016 Amplifier Interface
• NITO-01 interface • NITO-01 harness
• 16-pin harness with stripped leads • AX-CAM6V 12-volt to 6-volt converter
INTERFACE COMPONENTS
Connections to be made ................................................... 2
Installing the NITO-01 ....................................................... 3
Initializing the NITO-01 ..................................................... 3
Adjusting the NITO-01 ...................................................... 3
Extra settings .................................................................... 4
Table of Contents

Produkspesifikasjoner

Merke: Metra
Kategori: Ikke kategorisert
Modell: NITO-01

Trenger du hjelp?

Hvis du trenger hjelp med Metra NITO-01 still et spørsmål nedenfor, og andre brukere vil svare deg