Metra XSVI-9006-NAV Bruksanvisning

Metra Ikke kategorisert XSVI-9006-NAV

Les nedenfor 📖 manual på norsk for Metra XSVI-9006-NAV (4 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 2 brukere

Side 1/4
XSVI-9006-NAV
INSTALLATION INSTRUCTIONS
AxxessInterfaces.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 3/11/19 INSTXSVI-9006-NAV
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Small flat-blade screwdriver
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................3
Programming .........................................................3
Volkswagen Data Interface 2015-up
APPLICATIONS
Provides accessory power
(12-volt 10-amp)
Retains R.A.P. (retained
accessory power)
Provides NAV outputs (parking
brake, reverse, speed sense)
For use in non-amplified
systems, or when replacing an
amplified system
48-inch leads for remote tuner
location
Pre-wired ASWC-1 harness
(ASWC-1 sold separately)
Retains the factory backup
camera
Retains balance and fade
Micro-B USB updatable
Volkswagen
Beetle 2016-2019
Golf Series 2015-up
Jetta 2016-2018
Jetta GLI 2016-2018
Passat 2016-up
Tiguan 2016-2017
• XSVI-9006-NAV interface
• XSVI-9006-NAV harness
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications

Produkspesifikasjoner

Merke: Metra
Kategori: Ikke kategorisert
Modell: XSVI-9006-NAV

Trenger du hjelp?

Hvis du trenger hjelp med Metra XSVI-9006-NAV still et spørsmål nedenfor, og andre brukere vil svare deg