Microchip CD-MSCSM70XM19 Bruksanvisning
Microchip
Ikke kategorisert
CD-MSCSM70XM19
Les nedenfor 📖 manual på norsk for Microchip CD-MSCSM70XM19 (17 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 15 personer og ble vurdert med 4.3 stjerner i gjennomsnitt av 8 brukere
Side 1/17
User Guide
© 2024 Microchip Technology Inc. and its subsidiaries
DS00005197A - 1
Introducon
Microchip’s Integrated Actuation Solution is a highly integrated, scalable, reliable, cost-eective, compact, and
easy-to-use solution targeting electric motor drives and solenoids on actuator systems in aviation applications
and designed in accordance with aviation standards. It is designed to be driven with external PWM signals.
Safety
Before touching the device, ensure that you are free of electrostatic charge.
Before commencing the installation:
• Disconnect all external power supply.
• Ensure that external power supply cannot be accidentally restarted.
• Deviations of the input voltage from the rated value must not exceed the tolerance limits given in the
specications, otherwise this may cause malfunction and dangerous operation.
• Never touch live parts or cable connections.
Warning
THE DEVICE SHOULD BE INSTALLED BY QUALIFIED PERSONNEL ONLY.
DO NOT INSTALL THE UNIT IF THE UNIT IS VISIBLY DAMAGED.
CARRY OUT WIRING WORK ONLY IF THE UNIT AND CABLES ARE DE-ENERGIZED.
CARRY OUT WIRING WORK ONLY AFTER THE UNIT HAS BEEN CORRECTLY MOUNTED AND SECURED.
DO NOT PERFORM ANY MODIFICATIONS WHEN THE UNIT IS CONNECTED TO A POWER SUPPLY
TERMINALS J1 TO J13 ARE LIVE WHEN THEY ARE CONNECTED TO POWER, EVEN IF THE LOAD IS NOT OPREATING.
CONTACT WITH THIS VOLTAGE IS EXTREMELY DANGEROUS AND MAY CAUSE DEATH OR SEVERE INJURY.
DURING OPERATION THE DEVICE CAN EMIT ELECTROMAGNETIC INTERFERENCE (EMI).
FAILURE TO FOLLOW THESE PRECAUTIONS MAY CAUSE DEATH OR SEVERE INJURY.
Avoiding Electrostac Discharge (ESD)
Any handling of electronic devices must be subject to specic procedures for protecting electrostatic-sensitive
devices. This unit must be handled accordingly.
In order to ensure a ESD safe environment in which the work on electronics components or subassemblies
such as printed circuit boards are carried out, an ESD Protected Area (ESD PA or EPA) must be set up and
correctly used every time the product is handled or processed. An ESD PA or EPA or is designed to minimize the
generation and retention of ESD which prevents failures when handling and processing the device.
Overall ESD protection is required starting from incoming inspection up to nal assembly including all
intermediate stations in order to avoid possible damage to the units.
The product must not be handled or touched without ESD protection. Neglect of this condition may lead to
product damage or reduced product reliability. Note that the packaging materials used provide reliable ESD
protection.
Integrated Actuaon Soluon User Guide
CD-MSCGLQ75X120CTYZBNMG/CD-MSCSM70XM19CTYZBNMG
Produkspesifikasjoner
| Merke: | Microchip |
| Kategori: | Ikke kategorisert |
| Modell: | CD-MSCSM70XM19 |
Trenger du hjelp?
Hvis du trenger hjelp med Microchip CD-MSCSM70XM19 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Microchip Manualer
30 September 2025
30 September 2025
30 September 2025
30 September 2025
30 September 2025
30 September 2025
30 September 2025
30 September 2025
30 September 2025
30 September 2025
Ikke kategorisert Manualer
- Needit
- Eheim
- Televés
- Tork
- Betty Bossi
- Makita
- Powerplus
- Traco Power
- M-Audio
- Noveen
- Auriol
- Redback Technologies
- Zylight
- Middle Atlantic
- Wagner
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025