Mobotix Move VT1A-203-IR Bruksanvisning

Mobotix Sikkerhetskamera Move VT1A-203-IR

Les nedenfor 📖 manual på norsk for Mobotix Move VT1A-203-IR (10 sider) i kategorien Sikkerhetskamera. Denne guiden var nyttig for 31 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 16 brukere

Side 1/10
NOTE!
This guide is only valid for the 2MP Varifocal IR Vandal Turret. For installing and connecting
more information on the camera, please refer to the other documents (see ). Further Reading, p. 9
Important Installation Notes
n
This camera must be installed by qualified personnel and the installation should conform to
all local codes.
n
n
Do not use this product in a dusty environment.
n
Protect this product from moisture or water entering the housing.
n
Install this product as outlined in this document. A faulty installation can damage the
product!
n
Do not replace batteries of the camera. If a battery is replaced by an incorrect type, the bat-
tery can explode.
n
This equipment is not suitable for use in locations where children are likely to be present.
n
External power supplies must comply with the Limited Power Source (LPS) requirements and
share the same power specifications with the camera.
n
When using a ClassI adapter, the power cord shall be connected to a socket-outlet with
proper ground connection.
n
To comply with the requirements of EN 50130-4 regarding the power supply of alarm systems
for 24/7 operation, it is highly recommended to use an uninterruptible power supply (UPS) for
backing up the power supply of this product.
V1.07_1/29/2024, Order Code: Mx-VT1A-203-IR
Quick Installation
MOBOTIX MOVE 2MP Varifocal IR Vandal Turret
Mx-VT1A-203-IR
©2024 MOBOTIX AG

Produkspesifikasjoner

Merke: Mobotix
Kategori: Sikkerhetskamera
Modell: Move VT1A-203-IR

Trenger du hjelp?

Hvis du trenger hjelp med Mobotix Move VT1A-203-IR still et spørsmål nedenfor, og andre brukere vil svare deg