MuxLab 500759-TX-HLO Bruksanvisning
MuxLab
Audio/video-konverter
500759-TX-HLO
Les nedenfor 📖 manual på norsk for MuxLab 500759-TX-HLO (2 sider) i kategorien Audio/video-konverter. Denne guiden var nyttig for 26 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 13.5 brukere
Side 1/2
© MuxLab Inc. -000985-A -000985-A94 SE
2321Rue Cohen, Montreal, Quebec, Canada. H4R 2N7
Tel: (514) 905-0588 Fax: (514) 905-0589
Toll Free (North America): (877) 689-5228
E-mail: URL: www.muxlab.com info@muxlab.com
Specications
Environment
HDMI 2.0b
Devices
Blu-Ray, projectors, monitors, TV, PC, laptops, servers supporting HDMI.
Transmission
Transparent to the user.
Bandwidth
300MHz
Signals
HDMI 1.4 protocol
Connectors
Note: Cables not included.
One (1) HDMI receptacle for input.
One (1) HDMI loop out.
One (1) RJ45S for Cat 5e/6 unshielded or shielded twisted pair.
One (1) 3.5mm jack for IR emitter.
One (1) 3.5mm jack for audio insert.
One (1) RS232 (3-pin oenix connector). ph
Four (4) DIP Switches for device ID addressing.
Maximum Distance
Based on a maximum length
of 6.6ft (2m) of HDMI cable
per end.
Cat5e/6: 330ft (100m) up to 4K @ 30Hz (4:4:4) and 4K @ 60Hz (4:2:0)
Note: When installed in an electrically noisy environment, an STP cable must be
used. Also, cross-connection reduces the effective distance depending on the
grade of twisted cable used.
Latency
Typical one (1) Frame (16ms), maximum 2 frames (33ms).
Compression
JPG2000 Proprietary Compression.
Bandwidth
Up to Mbps. 850
Network Requirement
1Gb Ethernet Network
(Switch support for Jumbo Frame IGMP and PoE required, ).
IR Frequency
38 to 56 KHz (IR Emitter and IR Sensor sold separately).
RJ45 Pin Conguration
Reverse Polarity Sensitive.
Use EIA/TIA 568A or 586B
straight-through wiring.
RJ45 Link
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable
One (1) Cat 5e/6 or better twisted pair cables required.
Power Supply
This device supports PoE (PD), an external power supply is not included. It is
intended to be powered via a PoE (PSE) Ethernet Switch. If required, an optional
power supply (500993) may be purchased separately.
PoE
IEEE 802.3af
Power Consumption
Transmitter: 2.85Watt
Temperature
Operating: 0° to 40°C Storage: -20° to 85°C
Humidity: Up to 95% non-condensing
Dimensions
4.40” x 5.08” x 1.00” (112mm x 12 259 mm x mm)
Weight
1.5 s ( lb 0.68kg)
Compliance
Regulatory: FCC, CE, RoHS Flammability: 94V0
Warranty
3 years
Order Information
500759- -HLO HDMI over IP PoE TX with Loop Out, UHD-4K TX
(UPC: 627699927595)
Accessories
(These items are sold
separately)
500920 16-Port Rackmount Transceiver Chassis
500917 Wall Mount Transceiver Bracket Kit
500990 IR Emitter
500991 IR Sensor
500993 Univ. Locking Power Supply 5VDC/2.6A US/UK/EU Blade
H over IP PoE TX with Loop Out, UHD- DMI 4K
500759- - TX HLO
Quick Installation Guide
Overview
The HDMI over IP PoE TX with Loop Out, UHD-4K (model 500759-TX-HLO) allows HDMI
video equipment supporting up to 4K @ 30Hz or 1080p @ 60Hz resolution to be connected and
extended to create an independently distributed video network. 100’s of Single Displays and Video
Wall Displays of user congurable size (X by Y) may be supported, depending on network
bandwidth. In addition, the unit features a local HDMI video output which allows the video source
to be shown on a local display.
The unit can be connected via Cat5e/6 cable up to 330ft (100m) from an Ethernet Switch, and
supports PoE (PD) when powered by a PoE (PSE) Ethernet Switch. An IR Emitter or IR Sensor, if
required, may be purchased separately for IR based remote control applications of end devices.
The MuxLab Pro Digital Network Controller (500812) and MuxControl App are available to
simplify conguration and management of this and other MuxLab AV over IP networked devices
via (500812 web interface) Smartphone and Tablet (Apple or Android). PC ,
Applications
Applications include video wall, gital signage, commercial and residential AV systems, di
classroom projector systems, boardroom systems, collaborative PC systems, and medical
information systems.
Installation
1. Identify the connectors on the Transmitter as indicated on the produc labels, see the above front t
and rear product views for further details.
2. Verify that the distance between the HDMI Transmitter is within MuxLab specications (see
Specications table for more details).
3. To install the Transmitter:
3a. Connect th Transmitter to the HDMI video source with an HDMI compliant cable. e
3b. If the application is point- -point, then connect one (1) length of Cat 5e/6 (or higher) to
grade UTP cable to the RJ45 LINK connector on the Transmitter. If transmitting over
the network, use an Ethernet Switch between Transmitter and Receiver
Produkspesifikasjoner
| Merke: | MuxLab |
| Kategori: | Audio/video-konverter |
| Modell: | 500759-TX-HLO |
Trenger du hjelp?
Hvis du trenger hjelp med MuxLab 500759-TX-HLO still et spørsmål nedenfor, og andre brukere vil svare deg
Audio/video-konverter MuxLab Manualer
21 Februar 2025
21 Februar 2025
21 Februar 2025
21 Februar 2025
21 Februar 2025
21 Februar 2025
21 Februar 2025
12 Januar 2025
16 Oktober 2024
Audio/video-konverter Manualer
- AVPro Edge
- Kathrein
- Cudy
- Sitecom
- Crestron
- Antelope Audio
- LevelOne
- Intelix
- Ocean Matrix
- Jung
- Atlona
- Decimator
- PureTools
- RME
- Digitalinx
Nyeste Audio/video-konverter Manualer
8 April 2025
3 April 2025
3 April 2025
2 April 2025
2 April 2025
2 April 2025
2 April 2025
29 Mars 2025
29 Mars 2025
26 Mars 2025