Omega Speedmaster HB-SIA Bruksanvisning

Omega armbåndsurer Speedmaster HB-SIA

Les nedenfor 📖 manual på norsk for Omega Speedmaster HB-SIA (2 sider) i kategorien armbåndsurer. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/2

1 / 2

SPEEDMASTER

HB-SIA CO-AXIAL GMT CHRONOGRAPH NUMBERED EDITION 44.25MM

Titanium on titanium

Caliber

3603

321.90.44.52.01.001

Co-Axial escapement

Automatic

Chronometer

Time zone function

Second time zone

Tachymeter

Sapphire crystal

Anti-reﬂective treatment on both sides

Numbered Edition

3-year International Warranty

Water-Resistant to a relative pressure of 10 bar

(100 metres/330 feet)

WATCH FUNCTIONS

The crown has 3 positions:

1. Normal position (wearing position): when the crown is positioned against the

case, the crown ensures that the watch is water-resistant.

Occasional winding: if the watch has not been worn for 55 hours or more, wind it

up with the crown in position 1.

2. Setting the time zone and correcting the date: pull the crown out to position

2. Turn the crown forwards or backwards, and only the hour hand will move

forwards or backwards by 1-hour intervals. By passing the hour hand over

midnight, the date can be changed forwards or backwards. Push the crown back

to position 1.

Synchronisation of the hour hand and the ’24-hour’ hand

Pull the crown out to position 2 and turn it to synchronise the hour hand with the

time indicated by the ’24-hour’ hand on the 24-hour scale in the centre of the

dial. Make sure you set the hour hand in the correct half of the day!

After synchronising the hour hand with the ’24-hour’ hand, you must set the local

time on your watch. Push the crown back to position 1.

3. Time setting: 24 hours - hours – minutes – seconds. Pull the crown out to

position 3. The seconds hand will stop. Turn the crown forwards or backwards.

Synchronise the seconds by pushing the crown back to position 1 to coincide with

a given time signal.

SECOND TIME ZONE

Thanks to the ’24-hour’ hand with its triangular point, travellers can read the time

back home at a glance on the 24-hour scale at the centre of the dial.

2 / 2

CHRONOGRAPH FUNCTIONS

• Pusher A: start – stop, start – stop, etc.

Timing to 1/8 of a second for up to 12 hours.

• Pusher B: reset (after a stop).

Note: resetting/zeroing of the sub dials must only be carried out after the

chronograph has stopped. Never push the chronograph’s two pushers (A and B)

simultaneously.

TACHYMETRIC SCALES

The desired information is read between the central seconds hand of the

chronograph and the corresponding scale, over a maximum duration of 60

seconds.

Example: calculating the speed of a car.

Record the time the car takes to cover a distance of 1 kilometre. Read off the

tachymetric scale the speed indicated by the central seconds hand. In this case,

the car is travelling at 120 km/h.

Produkspesifikasjoner

Merke:	Omega
Kategori:	armbåndsurer
Modell:	Speedmaster HB-SIA
Mekanismetype:	Mechanical (auto winding), Mechanical (hand winding)
Kronometer:	Ja
Vanntett:	Ja
Stoppeklokke:	Ja
Klokketype:	Armbåndsur
Kjønnstype:	Hankjønn
Dekselfarge:	Black, Dark metallic
Glasstype:	Krystall
Klokkeetuiets materiale:	Titan
Ur-innstilling:	24 timers
Urskivetype:	Analog urskive
Vannbestandig dybdenivå:	100 m
Armbånd, materiale:	Titan
Hovedfarge på reim:	Mørk metallisk
Boks-form:	Rund
Hovefarge på urskive:	Sort
Urviser stil:	Arabiske tall
Vannbestandig trykknivå:	10 ATM
Produsent av urverk:	Omega
Modell urverk:	3603
Anti-reflekterende maling:	Ja
Urviser farge:	Hvit
Husdiameter:	44.25 mm
Co-axial flukt:	Ja
Kraft reserve:	52 timer
Ripe-sikkert glass:	Ja
Hastighets måler:	Ja