Phonic DT88 Bruksanvisning

Les nedenfor 📖 manual på norsk for Phonic DT88 (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 43 personer og ble vurdert med 4.9 stjerner i gjennomsnitt av 22 brukere

Side 1/2
DT44 | DT88 EXPANSION CARD
1
English
INTRODUCTION
The DT44 and DT88 are Asystems Dante
expansion cards for their digital matrix systems.
This allows for either 4x4 or 8x8 audio networking
with any other Dante-enabled Asystems product.
Asystems DMP8800, DMP808, DMA8825,
DMA8813, DMA8425, DMA8813, NT2508,
NT2504, NT1308, NT1304 or NT4004.
Use this expansion card only with appropriate
Asystems models. Using third party hardware
could be detrimental to the operation of the
product.
DANTE CONTROL SOFTWARE
To effectively route signals through your DT
expansion card and your Aystems product,
Asystems suggests installation of the Dante
Controller routing software. This is available for
free on the Audinate website.
https://www.audinate.com/products/software/
dante-controller
Software is compatible with Windows 7, Windows
8.1 and Windows 10. It is also compatible with
Apple OSX 10.10.5, OSX 10.11.6 and macOS
10.12.
Extensive user documentation and tutorial videos
can be found on Audinates site to help explain
how the Dante Controller software operates.
For information on routing through the Asystems
product, refer to your products user guide.
INSTALLATION
Ensure the power cable is not connected to the
device when installing the DT expansion card.
This ensures there are no live components in the
device that could result in electric shock. If unsure,
consult a qualied engineer for installation.
1. Loosen the two screws and remove the cover
plate.
2. Connect the DT44 or DT88 Dante Networking
card.
3. Tighten the two screws back to secure the
cover plate.

Produkspesifikasjoner

Merke: Phonic
Kategori: Ikke kategorisert
Modell: DT88

Trenger du hjelp?

Hvis du trenger hjelp med Phonic DT88 still et spørsmål nedenfor, og andre brukere vil svare deg