Power Dynamics PDX40 Bruksanvisning

Power Dynamics Ikke kategorisert PDX40

Les nedenfor 📖 manual på norsk for Power Dynamics PDX40 (24 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF
Side 1/24
PDX40 Stereo BT Audio Receiver
Ref. nr.: 172.770
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKCJA OBSŁUGI
NÁVOD K POUŽITÍ
V1.1
2
ENGLISH
Congratulations to the purchase of this Power Dynamics product. Please read this manual thoroughly prior to using the unit in
order to benefit fully from all features.
Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to
avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the unit, please ask advice from a
specialist. When the unit is switched on for the first time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the unit
This may cause electrical shock and malfunction.
- Do not place the unit near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The unit is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the unit from a mains outlet, always
pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualified technician.
- If the unit is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the unit on. Contact your dealer.
- To avoid fire and shock hazard, do not expose the unit to
rain and moisture.
- All repairs should be carried out by a qualified technician
only.
- Connect the unit to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the unit will not be used for a
longer period of time, unplug it from the mains. The rule
is: Unplug it from the mains when not in use.
- If the unit has not been used for a longer period of time,
condensation may occur. Let the unit reach room
temperature before you switch it on.
- Never use the unit in humid rooms or outdoors.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Do not repeatedly switch the fixture on and off. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Do not force the controls.
- This unit has a speaker inside that can cause magnetic
field. Keep this unit at least 60cm away from computer or
TV.
- If this product has a built-in lead-acid rechargeable
battery: Please recharge the battery every 3 months if
you are not going to use the product for a long period of
time. Otherwise the battery may be permanently
damaged.
- If the battery is damaged, please replace with same
specifications battery. Dispose the damaged battery
environmentally friendly.
- If the unit has been dropped, always have it checked by
a qualified technician before you switch the unit on again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the unit with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the unit off prior to unplugging it from the mains
and/or other equipment. Unplug all leads and cables
prior to moving the unit.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this unit.
- Keep the original packing material so that you can
transport the unit in safe conditions.
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and
their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/41°F and
35°C/95°F.
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.
Specifications can be changed without prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid
your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings
contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.
3
UNPACKING INSTRUCTION
CAUTION! Carefully unpack the box upon receipt. Check the contents to ensure that all parts are present and have been
received in good condition. Notify the shipper immediately and retain packaging material if any parts appear damaged from
shipping or the package itself shows signs of mishandling. Save the package and all packaging materials. If the product must be
returned, it is important that the product is returned in the original factory box and packaging.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
POWERSUPPLY
The label on the back/under side of the product indicates the mains voltage to which it must be connected. Check that the mains
voltage corresponds to this. Any other voltage than the one indicated may cause irreparable damage to the unit. The unit must
also be connected directly to the mains voltage and no dimmer or adjustable power supply may be used.
Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the device has an appropriate
electrical ground to avoid the risk of electrocution or fire.
OVERVIEW
1. BT ANTENNA
The antenna receives and transmits the BT signal from a paired BT device.
2. STATUS LED
This LED indicates the unit's BT pairing status.
Light off: The unit is not paired to a BT compatible device. The unit is not able to make BT pairing in this state.
Light flashing: The unit can be paired to a BT device.
Light on: paired to BT device.
3. EXTERNAL PAIR BUTTON
Connection block for installing an external pair button.
4. PAIR
Press this button to make this unit available for pairing to a compatible BT device.
When paired, press this button to unpair.
5. OUTPUT VOLUME LEVEL
Rotate to adjust the output volume level (both balanced and unbalanced outputs).
6. POWER INPUT
Use the supplied power adapter to connect this input to a power outlet.
7. BALANCED OUTPUT
XLR output sockets. These outputs carry the signal from a paired BT device. Use XLR cables to connect these outputs to
your loudspeakers, mixer, etc.
8. UNBALANCED OUTPUT
6.3mm output jacks. These outputs carry the audio from a paired BT device. Use standard 6.3mm cables to connect these
outputs to your loudspeakers, mixer, etc.
OPERATION
Before transmission between your BT device and the PDX40 is possible, both devices must be coupled. This process is called
"pairing". The PDX40 is served as a receiver, to receive the music stream to be carried over. Once you “pair” your BT device
with the PDX40, they are “connected” wirelessly. You can play audio on your BT device, the signal will be carried over to the
PDX40 outputs (balanced and unbalanced).
NOTE: The PDX40 will not receive audio from a phone call. Recommended is to disable your cellular connection when using.
When a pairing has been successful, other BT devices cannot pair. To be able to pair another device, unpair (“disconnect”) the
currently paired BT device.
If you have already coupled to a BT device before, this connection will be restored automatically when both devices are in range
and BT operation has been selected. "Pairing" does not have to be repeated. This function may need to be activated within your
BT devices’ settings menu, however.
• Press the PAIR button to make a connection possible.
• Enter the BT settings menu on your BT streaming device, select PDX40 and initiate the pairing.
NOTE: If a PIN code is required, enter “0000”.
When paired, press PAIR to unpair.

Produkspesifikasjoner

Merke: Power Dynamics
Kategori: Ikke kategorisert
Modell: PDX40

Trenger du hjelp?

Hvis du trenger hjelp med Power Dynamics PDX40 still et spørsmål nedenfor, og andre brukere vil svare deg


Ikke kategorisert Power Dynamics Manualer

Power Dynamics

Power Dynamics D750250 Bruksanvisning

26 August 2025
Power Dynamics

Power Dynamics PDV120MP3 Bruksanvisning

26 August 2025
Power Dynamics

Power Dynamics PDX40 Bruksanvisning

26 August 2025
Power Dynamics

Power Dynamics PRM120 Bruksanvisning

26 August 2025
Power Dynamics

Power Dynamics PDCS403V Bruksanvisning

14 Januar 2025
Power Dynamics

Power Dynamics PRC120 Bruksanvisning

6 Januar 2025
Power Dynamics

Power Dynamics CSF6 Bruksanvisning

1 Januar 2025
Power Dynamics

Power Dynamics PMP360 Bruksanvisning

20 Oktober 2024
Power Dynamics

Power Dynamics BHW60WH Bruksanvisning

15 Oktober 2024
Power Dynamics

Power Dynamics MSLP65 Bruksanvisning

15 Oktober 2024

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer

Ideal

Ideal 74-032 Bruksanvisning

15 September 2025
Xiaomi

Xiaomi Electric Kettle 2 Lite Bruksanvisning

15 September 2025
Swingline

Swingline Commercial Electric Punch Bruksanvisning

15 September 2025
Tunturi

Tunturi Platinum UB20 Bruksanvisning

15 September 2025
Bosch

Bosch GGP 12V-25 Professional Bruksanvisning

15 September 2025
Xiaomi

Xiaomi Oclean One Bruksanvisning

15 September 2025
Tunturi

Tunturi Cardio Fit D20 Deskbike Console Bruksanvisning

15 September 2025
Bosch

Bosch GKE 18V-15 Professional Bruksanvisning

15 September 2025
Xiaomi

Xiaomi Smart Pet Food Feeder 2 Bruksanvisning

15 September 2025
Bosch

Bosch GRC 12V-60 1/2 SN Professional Bruksanvisning

15 September 2025