RAM Mounts RAM-GDS-B-101LB-SAM21U Bruksanvisning

RAM Mounts Ikke kategorisert RAM-GDS-B-101LB-SAM21U

Les nedenfor 📖 manual på norsk for RAM Mounts RAM-GDS-B-101LB-SAM21U (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/2

Max. power 5V - 12V @2A per port* (Includes power cord for 110V outlets. Can be used with 220V outlets with the use of an adapter).

*mUSB products supporting USB 2.0/3.0 will have a max. current of 1.5A

RAM-GDS-DOCK-4G1PU

RAM-GDS-DOCK-6G1PU

rammount.com

1.800.497.7479

support@rammount.com

GDS

6-Port Desktop Charger

for IntelliSkin

Products

RPR-INS-GDS-DOCK-6G1P

This document, including images, may not be reproduced partly or fully without the expressed written consent of National Pr

oducts, Inc.T

o see more mounting options, visit rammount.com

Distinctive “D” shape

While RAM

products are designed to function ﬂawlessly, there is always the potential that the product may not function

as expected. Most often product issues can be resolved by the customer prior to sending the product in for warranty or

replacement. If you experience issues, please follow the guidelines below prior to contacting customer support for assistance.

Troubleshoot:

(Follow these steps if you encounter any charging issues with your GDS Dock)

• Verify that the dock’s power cord is securely plugged into the dock as well as the wall power source. Assure that the power

source is functional by testing with an alternate electronic device.

• Verify that the IntelliSkin

connector is securely connected to your device.

• Verify that the IntelliSkin is seated properly in the receptacle of the GDS dock.

• After verifying the above steps, see GDS General Care and Maintenance below to verify that your dock and IntelliSkin has

been properly cleaned.

GDS General Care & Maintenance

• For any accidental spills or accumulated dirt on the pogo pins of the dock, use contact cleaner or alcohol on a cotton swab to

gently clean. Clean the contacts on the IntelliSkin, using contact cleaner or alcohol with a stiff brush.

• For industrial and heavy use environments, clean pogo pins and contacts on a regular basis.

3 year warranty on all electronic components / Lifetime Warranty on all non-electronic components

The exclusive NPI Lifetime Warranty states that all GDS non-electonic components and parts are warranted against defect in materials and

workmanship for the life of the product or part. NPI’s Lifetime Warranty covers the product or its components only.

The mount device is not covered under the Lifetime Warranty and will not be replaced if damaged as a result of mount failure. This warranty is

expressly limited to persons in the United States, and all foreign countries who purchase GDS for resale or use in the ordinary course of the buyer’s

business. This warranty does not cover any product or part that has been abused, worn out, heated, ground or otherwise altered, used for a

purchase other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use.

GDS®, IntelliSkin™, GDS Tech™, GDS Technology™, GDS Green™ and GDS Compatible™ are trademarks or registered trademarks of National Products Inc.

The distinctive D shape™ of the GDS connector is a trademark of National Products Inc. Patents and Trademarks: www.rammount.com/ip