Rolls SX45 Bruksanvisning
Rolls
Ikke kategorisert
SX45
Les nedenfor 📖 manual på norsk for Rolls SX45 (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 20 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 10.5 brukere
Side 1/1
The SX45 is a unique frequency dividing device for sound re-
inforcement applications. The unit features a 12 dB/Octave roll
o rate, a frequency dividing range of 50Hz to 2.5kHz, and an
external power supply for noise reduction.
DESCRIPTION
FRONT PANEL
INPUT: Adjusts the input level to the SX45.
FREQUENCY: Selects the crossover frequency from 50Hz to
2.5kHz.
LOW LEVEL: Adjusts the amount of output signal from the LOW
OUT jacks.
HIGH LEVEL: Adjusts the amount of output signal from the HIGH
OUT jacks.
CLIP LED: Indicates overload in the SX45. This LED lights 3 dB
before actual circuit clipping occurs.
PWR LED: Indicates the SX45 power supply is connected to the
unit and an AC outlet.
SX45 Stereo Two-Way Crossover
Connection guide
SPECIFICATIONS:
Input Impedance: 10K Ohm
Output Impedance: 1K Ohm
Headroom: +10 dBV
Power Requirements: 12 - 15 VDC, 150-500 mA;
Rolls part number PS27s
Size: 4.25” x 3.625” x 1.5”
Weight: 1 lb.
Rolls Corporation
Salt Lake City, UT
9/18
What's in the box?
1 - Made in USA SX45
1 - 15V power supply PN PS27s
1 - This owners manual
• 12 dB/Octave roll o
• Stereo RCA Input and Outputs
• 50Hz to 2.5 kHz crossover range
• Mono Sub Output
Connect the Inputs of the SX45 to the output of a mixer or other device
containing the stereo signal to be divided. This signal should be Line-
Level, or reference 0 to +4 dB. The High and Low Outputs should be
connected to the proper amplier and speaker combination.
Set all SX45 Levels to zero. Begin by applying signal from the mixer/
signal source to the SX45. Carefully increase the Input Level until you
see the Clip LED begin to blink. Slightly reduce the Input Level from this
point. This should insure a proper input signal level without clipping,
thereby giving you the best noise performance.
Set your ampliers to their normal operating level (many ampliers
are simply set at their full volume level). Carefully begin increasing
the SX45 High and Low Level controls until you reach a desired
and balanced volume level.
REAR PANEL
(Note: The rear panel jacks are labeled on the top of the unit.)
INPUT: Dual RCA jacks for connecting to the output of a mixer or other
device containing the signals to be divided.
HIGH OUT: Dual RCA jacks containing the signal of frequencies above
the crossover frequency.
LOW OUT: Dual RCA jacks containing the signal of frequencies below
the crossover frequency.
MONO LOW OUT: Dual RCA jacks with a mono, combined signal from
the stereo Low Out jacks.
DC IN: For connection to the Rolls model PS27s.
Produkspesifikasjoner
| Merke: | Rolls |
| Kategori: | Ikke kategorisert |
| Modell: | SX45 |
Trenger du hjelp?
Hvis du trenger hjelp med Rolls SX45 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Rolls Manualer
13 Januar 2025
13 Januar 2025
12 Januar 2025
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
20 Oktober 2024
16 Oktober 2024
Ikke kategorisert Manualer
- Zacuto
- Cane Creek
- Buchla & TipTop Audio
- Magmatic
- Terratec
- Randell
- V7
- Shoprider
- Exelpet
- Konftel
- Budda
- Subaru
- Alogic
- Mikrotik
- Rademacher
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025