Ryobi RMX001 Bruksanvisning
Ryobi
sementblandere
RMX001
Les nedenfor 📖 manual på norsk for Ryobi RMX001 (56 sider) i kategorien sementblandere. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere
Side 1/56
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
5 cu. ft. (0.14 m
3
) CONCRETE MIXER
MÉLANGEUR DE BÉTON
DE 0,14 m
3
(5 cu. ft.)
MEZCLADORA DE HORMIGÓN
DE 0,14 m
3
(5 cu. ft.)
RMX001
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
General Power Tool
Safety Warnings ............................. 2-3
Concrete Mixer
Safety Instructions ......................... 3-4
Symbols ..............................................5
Electrical ......................................... 6-7
Features ..............................................8
Tools Needed .....................................9
Loose Parts List ..................................9
Assembly .................................... 10-13
Operation .................................... 14-18
Maintenance ..................................... 18
Troubleshooting ...............................19
Parts Ordering / Service ..... Back Page
TABLE DES MATIÈRES
****************
Avertissements de sécurité
relatives aux outils électriques ....... 2-3
Consignes de sécurité
pour le mélangeur de béton ........... 3-4
Symboles ............................................5
Caractéristiques électriques ........... 6-7
Caractéristiques .................................8
Outils nécessaires ..............................9
Liste des pièces détachées ................9
Assemblage ................................ 10-13
Utilisation .................................... 14-18
Entretien ...........................................18
Dépannage .......................................19
Commande de pièces /
réparation ......................... Page arrière
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad
para herramientas eléctrica ........... 2-3
Instrucciones de seguridad
de la mezcladora de hormigón ...... 3-4
Símbolos ............................................5
Aspectos eléctricos ........................ 6-7
Características....................................8
Herramientas necesarias ....................9
Lista de piezas sueltas .......................9
Armado ....................................... 10-13
Funcionamiento .......................... 14-18
Mantenimiento ..................................18
Solución de problemas ....................19
Pedidos de piezas /
servicio .......................... Pág. posterior
2 − English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING:
Read all safety warnings, instructions, illustrations,
and specifications provided with this power tool.
Failure to follow all instructions listed below may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodied plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your nger on the switch or
energising power tools that have the switch on invites
accidents.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair and clothing away from moving parts.
Loose clothes, jewelry, or long hair can be caught in
moving parts.
Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
Do not wear loose clothing or jewelry. Contain long
hair. Loose clothes, jewelry, or long hair can be drawn
into air vents.
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the
3 − English
GENERAL POWER TOOL SAFETY WARNINGS
CONCRETE MIXER SAFETY INSTRUCTIONS
power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
Know your power tool. Read operator’s manual
carefully. Learn its applications and limitations, as well
as the specific potential hazards related to this tool.
Following this rule will reduce the risk of electric shock,
re, or serious injury.
Always wear eye protection with side shields marked
to comply with ANSI Z87.1. Failure to do so could result
in materials being thrown into your eyes, resulting in
possible serious injury.
Protect your lungs. Wear a face or dust mask if the
operation is dusty. Following this rule will reduce the
risk of serious personal injury.
Keep the cord away from the working area. The cord
may be entangled by the drum.
To reduce the risk of electrical shock, do not put the
mixer in water or other liquid. Do not place or store
appliance where it can fall or be pulled into water.
Never stand on the tool. Serious injury could occur if the
tool is tipped or if you accidentally contact any moving
parts.
Do not contact moving parts.
Do not reach into the drum with your hands or insert
any other objects including trowels and shovels into
it while mixing. Contact with the tines or substances
inside the drum may lead to serious personal injury.
Do not use this tool to mix flammable or explosive
materials. Fire or explosion can cause severe burns or
death.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Do not mix food. Power tools and their accessories are
not designed for processing food.
Follow the instructions and warnings for the material
to be mixed. Material to be mixed may be harmful.
Only use attachments recommended or sold by the
manufacturer.
Always get help if you need to lift the tool. When lifting,
hold the tool close to your body. Bend your knees so you
can lift with your legs, not your back.
When moving the tool or adjusting the positon of the
drum, hold the tool with both hands at the intended
handles. Loss of control can cause personal injury.
Before moving the tool, empty the drum and
disconnect the power supply.
Put the tool on a firm level surface where there is
plenty of room to make adjustments and properly
operate the tool.
Make sure all adjustments are secure and the work
area is clear of tools and other obstructions before
operating the tool.
Produkspesifikasjoner
| Merke: | Ryobi |
| Kategori: | sementblandere |
| Modell: | RMX001 |
Trenger du hjelp?
Hvis du trenger hjelp med Ryobi RMX001 still et spørsmål nedenfor, og andre brukere vil svare deg
sementblandere Ryobi Manualer
31 August 2025
sementblandere Manualer
Nyeste sementblandere Manualer
28 August 2025
25 August 2025
11 August 2025