Sabrent SB-HTSS Bruksanvisning

Les nedenfor 📖 manual på norsk for Sabrent SB-HTSS (10 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 16 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/10
Sabrent Rocket Heatsink
Installation Guide
When installing any NVMe PCIe GEN 4 directly onto a
PCIeGEN 4 motherboard, a heatsink is required to dissipate
the heat generated by the drive’s extreme speed levels to
avoid thermal throttling and to maximize the performance.
Many PCIe GEN 4 motherboards are sold with a built in
heatsink, so you’re good to go without an added heatsink.
Just follow the manufacturers user manual for the installation
instructions. If your motherboard does not have a built in
heatsink, we recommend using the Sabrent Rocket Heatsink
NVMe PCIe extreme speeds generate excessive heat, to help
dissipate the heat. has developed a state of the art Sabrent
heatsink using the winning combination of copper and
aluminum. The copper is used to absorb the heat from the
drive, spreading it up to the grooved aluminum, giving the
heat more air surface to cool off, therefore avoiding thermal
throttling and maximizing the performance of your drive.
1
SABRENT ROCKET HEATSINK INSTALLATION GUIDE
1. Make sure to remove the clear thermal tape protector from
the thermal tape, placed both on the heatsink and on the tray,
prior to placing the drive in the tray.
2

Produkspesifikasjoner

Merke: Sabrent
Kategori: Ikke kategorisert
Modell: SB-HTSS

Trenger du hjelp?

Hvis du trenger hjelp med Sabrent SB-HTSS still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Sabrent Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer