Sauermann Si-ATE320 Bruksanvisning

Les nedenfor 📖 manual på norsk for Sauermann Si-ATE320 (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 7 personer og ble vurdert med 4.2 stjerner i gjennomsnitt av 4 brukere

Side 1/3
Si-ATE320
Flush-mount display
DATA SHEET
FEATURES
RS485 MODBUS protocol
communication
IP 66, VHP* resistant
30 pre-programmed units and custom
Graphic Touch display
Display of 1 to 3 parameters
Visual and acoustic alarms
EXAMPLES OF APPLICATION
Critical environments that require accurate
monitoring of differential pressure and
other key air parameters (clean rooms,
operating rooms, labs, prodution sites...)
Air parameters monitoring (in glove boxes,
fume hoods, isolation cabinets, liquid lling
machines...)
Monitoring the differential pressure,
relative humidity/temperature and
environmental CO
2
levels in labora-
tories where incubators are used
*Vaporized Hydrogen Peroxide
The are a good solution to integrate the measured by other ush-mount displays visualisation of the parameters
sensors/transmitters into a single display device and, simultaneously, transfer these measurements to a BMS or Scada
through modbus RTU.
TABLE OF THE PRE-PROGRAMMED UNITS
TOUCH
SCREEN
Domain Units Resolution
Pressure Pa, mmH
2
O, inwg, mbar, mmHg, daPa, kPa, hPa
1 / 0.1 / 0.01 / 0.001 / 0.0001 / 0.00001
Hygrometry %RH, g/m³ g/kg, kJ/kg, °C
td
, °F
td
, °C
tw
, °F
tw,
°C
tf
, °F
tf
Temperature °C, °F
Air velocity m/s, fps
Airow m³/h, l/s, m³/s, dam³/h, cfm
Gas concentration ppm, ppm, ppb
Air change rate ACH

Produkspesifikasjoner

Merke: Sauermann
Kategori: Ikke kategorisert
Modell: Si-ATE320

Trenger du hjelp?

Hvis du trenger hjelp med Sauermann Si-ATE320 still et spørsmål nedenfor, og andre brukere vil svare deg