SolidDrive MSK-1SM-T Bruksanvisning
SolidDrive
Ikke kategorisert
MSK-1SM-T
Les nedenfor 📖 manual på norsk for SolidDrive MSK-1SM-T (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 19 personer og ble vurdert med 4.8 stjerner i gjennomsnitt av 10 brukere
Side 1/2
WARRANTY
WARNING
SolidDrive MSK-1-T/MSK-1SM-T/MSK-1G-T Specications
Type
Construction
Dimensions
Weight
SolidDrive MSK-1-T In-Wall and In-Ceiling
(Required for Drywall Mounting) Mounting Bracket Specications
NOTE: When installed in Canada, this product must be installed in accordance with the
Canadian Electrical Code, C22.1, Part1.
Type
Frequency Response(Hz)
Recommended Amplier Power
MSK-1-T & MSK-1sm-T Dimensions
MSK-1g-T Dimensions
Weight
UL Listing
Full Range Transducer
70 Hz to 15 kHz
10 Watts
2.28'' Diameter x 4.8'' Height
Mounting Foot 3.5'' Diameter
2.28'' Diameter x 4.8'' Height
Mounting Foot 2.0'' Diameter
1.5 lb / .68 kg
1480 & 2043 Pending
Patented balanced cantilever spring bracket
Heavy duty, galvanized steel
12OC – 2.0'' H x 17.5'' W x 5.0'' D
16OC – 2.0'' H x 25.5'' W x 5.0'' D
24OC – 2.0'' H x 13.5'' W x 5.0'' D
1.0 lb / .45 kg
218-2127-T REV-08.14.17
SolidDrives are guaranteed for 7 years from date of purchase. Any misuses or modi-
cations to this equipment in any way will void the warranty.
Read instructions prior to operating. To reduce the risk of re or electric shock, do not
expose this product to rain or moisture. Unplug prior to cleaning and clean with a damp
cloth. There are no user-serviceable parts in this product, please refer all servicing to
qualied personnel.
INSTALLATION & USE GUIDE
for MSK-1-T, MSK-1sm-T & MSK-1g-T
Sound Masking Transducer
INSTALLATION OF SOLIDDRIVE MSK-1-T INTO WALLS AND CEILINGS
GETTING STARTED WITH SOLIDDRIVE
Experience Audio Perfection
Induction Dynamics extensive line of audio products makes it easy to create the
ultimate audio system, regardless of installation requirements. Induction Dynamics
builds these products with only the most select components and materials; and
utilizes numerous unique and proven technologies.
By utilizing these basic installation steps, you can install the SolidDrive MSK-1-T into walls
and ceilings for a variety of sound masking applications.
What’s included with the SolidDrive MSK-1-T for installation into walls and ceilings and
what is supplied by the installer —
A SolidDrive MSK-1-T consists of: One (1) SolidDrive MSK-1-T unit with included 10W
transformer, supplied with 4 hard wire leads and one duplex conduit connector. *Additional
mounting materials may need to be ordered with the SolidDrive MSK-1-T or supplied by the
installer depending on the application.
For drywall: For in-wall and in-ceiling installation, you will have ordered one (1) or more
SolidDrive MSK-1-T’s and one (1) or more patented acoustic in-wall mounting brackets (one
(1) bracket per MSK-1-T), which comes with four (4) #8-32 x 5/16'' Phillips at head machine
screws for mounting the drive to the bracket. At the time of the order, you will also have
specied mounting bracket(s) in widths of 12OC, 16OC, or 24OC (ON CENTER of wall studs or
ceiling joists) for proper width. *Installation also requires four (4) 1 3/8'' drywall screws and
one (1) container of 3M
®
Super 77 Spray Adhesive (supplied by the installer).
EXISTING DRYWALL INSTALLATION NOTE:
For retrotting the SolidDrive MSK-1-T into existing drywall installations, it will be necessary
to remove a portion of the existing drywall before installation and to replace the drywall after
the SolidDrive MSK-1-T is installed. Please refer to the instructions marked with EXISTING
DRYWALL for the steps necessary for the type of installation. If installing the SolidDrive
MSK-1-T in new construction, IGNORE the EXISTING DRYWALL steps.
STEP 1
INSTALLATION INTO EXISTING DRYWALL
For installing the SolidDrive mounting bracket into existing drywall, rst cut a MSK-1-T
rectangular opening in the drywall. The minimum recommended opening size is approximately
fteen inches tall and beyond the width of the adjacent wall studs. This will help in attaching
the mounting bracket, feathering the drywall back in, and getting the drywall to meet at the
seams (Figure 1). This will allow proper distribution of sound and the SolidDrive MSK-1-T will
function with optimum performance.
Figure 1
Cut an opening
large enough
to install the
mounting
bracket to the
wall studs
STEP2
Attach the SolidDrive mounting bracket to wall studs or ceiling joists
Place the mounting bracket between the wall studs or ceiling joists and secure with four 1 3/8"
drywall screws. Insert the screws through the four pre-drilled holes in each ange and screw
them into the face of each wall stud or ceiling joist (Figure 2). The drywall screws need to be
driven ush with the surface of the ange so that the drywall sets ush on the bracket ange.
MSE Audio / 8005 W 110th St / Suite 208 / Overland Park, KS 66102 / 855.663.5600 / 913.663.5600 / www.soliddrive.com
Produkspesifikasjoner
| Merke: | SolidDrive |
| Kategori: | Ikke kategorisert |
| Modell: | MSK-1SM-T |
Trenger du hjelp?
Hvis du trenger hjelp med SolidDrive MSK-1SM-T still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert SolidDrive Manualer
3 April 2025
3 April 2025
4 Februar 2025
4 Februar 2025
4 Februar 2025
4 Februar 2025
Ikke kategorisert Manualer
- HDFury
- MAK
- ENDORFY
- One Control
- Panduit
- Fellow
- Memphis Audio
- Gourmetmaxx
- Zojirushi
- Rupert Neve Designs
- Bryton
- Owon
- JOBY
- Elektrobock
- Cardiac Science
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025