Soundskins SSK-GLDTR Bruksanvisning

Les nedenfor 📖 manual på norsk for Soundskins SSK-GLDTR (5 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 20 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 10.5 brukere

Side 1/5
Jeep JK/JL/Gladiator Kit Instructions
3a. Next, you need to prop the window up out of the way.
For JLs and Gladiators, turn the accessory on, pop open the
two circular rubber service caps on the door panel, and row
the window around 3/4 of the way down until the bolts are
centered in the cap holes. Then, pull the clips connected to
the glass up. This will allow you to remove the glass and
slide it all the way up to install the kit. Prop the window up
with a rubber wedge covered by a microfiber cloth or place
a screwdriver in the hole underneath the window to prop the
glass up.
1. Start by locating the fastening hardware on the door
panel, take the appropriate screw driver and remove. Once
all the screws are removed you can take off the door panel
gently, watching that you don’t break any of the clips or
mounting hardware.
2. Pull the panel away slowly and unplug any electrical
connections. Under the panel, you will find plastic insert
over the metal door.
R
• Drill with socket set and extension
• Panel/trim tool
• Roller
• Razor blade
• Screw driver
• Rubber wedge
• Microber cloth
• Acetone or cleaning solution
• Shop vacuum
Tools needed for installation:

Produkspesifikasjoner

Merke: Soundskins
Kategori: Ikke kategorisert
Modell: SSK-GLDTR

Trenger du hjelp?

Hvis du trenger hjelp med Soundskins SSK-GLDTR still et spørsmål nedenfor, og andre brukere vil svare deg