Soundskins SSK-STGLD14 Bruksanvisning
Soundskins
Ikke kategorisert
SSK-STGLD14
Les nedenfor 📖 manual på norsk for Soundskins SSK-STGLD14 (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 23 personer og ble vurdert med 4.4 stjerner i gjennomsnitt av 12 brukere
Side 1/3
14+ Harley Davidson Saddlebag Kit Installation Instructions
This kit ts both standard factory bags, extended bags, as well as aftermarket stretched bags.
The kit is designed to dramatically lower the resonant characteristics of saddlebags which makes
them much better speaker enclosures and reduces unwanted noises. It kit can be used alone, but
it is intended to be covered by a custom bag liner. Bag liners are common and readily available
from many sources. Multi sectioned liner should be used so that the thickness of the sound
deadener can be accounted for. Pre-molded bag liners may have tting issues and may need to be
modied.
Plan ahead for other items installed in the bags. If you have speakers or ampliers mounted inside
your bags, you will need to account for them when installing this kit.
For example: American Hard Bag amplier mounting racks have a plastic puck that needs to be
epoxied into the bag prior to installation of this kit. The panels can then be cut to t around the
amp rack mounting puck. American Hard Bag 8 inch and 10 inch woofer kits work well with this kit,
but you must fully install the woofer kit before installing the SoundSkins kit into the bags. Do not
install the speaker grills or the foam gasket that comes in your American hard bag woofer kit.
Once you have installed the woofer kit and tted the woofers (less the grills), unscrew and remove
both the woofers and the woofer mount as a single item. Then, install the kit and cut around the
speaker grill holes in the bag. Next, use the double sided speaker grill mounting tape to mount the
speaker grills to the woofer mount. Then, re-install the woofer kit with woofers into the bag. The
SoundSkins material will act as a sealing gasket between the woofer mount and the bag.
Thoroughly clean and degrease the inside of both bags. SoundSkins material has a self adhesive
backing that will permanently bond to the bag once in place, so be careful when you position
the material, as it may be dicult to get it back o once in place. Generally, the material can be
repositioned if it is not pressed in place. Care must be taken not to tear the material when
repositioning.
Produkspesifikasjoner
| Merke: | Soundskins |
| Kategori: | Ikke kategorisert |
| Modell: | SSK-STGLD14 |
Trenger du hjelp?
Hvis du trenger hjelp med Soundskins SSK-STGLD14 still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Soundskins Manualer
12 Mars 2025
12 Mars 2025
24 Januar 2025
24 Januar 2025
24 Januar 2025
24 Januar 2025
24 Januar 2025
24 Januar 2025
24 Januar 2025
24 Januar 2025
Ikke kategorisert Manualer
- Jungle Gym
- Zanussi
- Conair
- DQ
- Sortimo
- Consul
- BZBGear
- Buchla & TipTop Audio
- OSO
- Xcellon
- Privileg
- Comica
- Pelican
- Ixxat
- Erica Synths
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025