Soundsphere SS-BCL Bruksanvisning

Les nedenfor 📖 manual på norsk for Soundsphere SS-BCL (1 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 7 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/1
FLANGE CLAMP
Installation Guidelines
Rev 10.22.2019
Install Instructions
Please read this Installation Guide and the attached manufacturer’s Installation Instructions carefully.
These guidelines apply to the following product only: CADDY
®
, Flange Clamp, model 4-H-2-4 (4H24).
Follow the manufacturer’s installation instructions for proper installation techniques and use of this product (see page 2).
or 3.17 - 6.35mm).
The Maximum Static Load (MSL limit) is 200 pounds (90.9 kg). The MSL applies to the clamp only - all other fasteners must
meet or exceed that weight load rating.
Never exceed the Safety Factor Limits of this product. Always allow a load safety factor based on local, state, and/or
Federal codes and regulations
The clamps are designed for axial loads only (see page 2 illustrations). Lateral or side loading must be avoided.
Ensure the clamps are installed properly. They must not be forced onto a ange that is too thick (more than 1/4, 0.250” or
6.35mm). They must not be used on a ange that is too thin (1/8”, 0.125or 3.17mm). Measure the ange if in doubt of its
thickness.
Always visually inspect clamp installation. Check to ensure that the clamp is installed square with the ange. Check to
ensure that the clamp is secure after installation.
Never strike the clamp with a hammer or other metallic device.
These clamps are designed for indoor use in non-corrosive environments only.

Produkspesifikasjoner

Merke: Soundsphere
Kategori: Ikke kategorisert
Modell: SS-BCL

Trenger du hjelp?

Hvis du trenger hjelp med Soundsphere SS-BCL still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Soundsphere Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer