StarIink Router Gen 3 Bruksanvisning

StarIink Ruter Router Gen 3

Les nedenfor 📖 manual på norsk for StarIink Router Gen 3 (3 sider) i kategorien Ruter. Denne guiden var nyttig for 21 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/3
GEN 3 WIFI ROUTER
| GEN 3 ROUTER SETUP GUIDE (HIGH PERFORMANCE KIT)
Compatibility: High Performance Starlink Dish
3. Unplug your Gen 2 Router from the High Performance Power Supply, set aside.
1. Start by making sure your Starlink is set up and connected to the internet prior to setting up your Gen 3 Router.
Connect to your existing Starlink WiFi network from your device.
2. Unbox your Gen 3 Router Kit.
Setup
support.starlink.com
4. Plug the Gen 3 Router into a power outlet using the power cable and power supply.
Gen 3 Router
HP Cable
Gen 3 Router
Power Cable
Power SupplyStarlink Plug RJ45 CoverGen 3 Router
1.5 m
(4.92 ft)
1.5 m
(4.92 ft)
5. Plug the provided Starlink Gen 3 Router cable into port 1 on the router and the available port on the High Performance Power Supply.
support.starlink.com
6. On your device, find and connect to the STARLINK network in your WiFi settings.
7. You are now connected! The light on the Gen 3 Router should be solid white, and you can use the Starlink App
to customize additional settings, check your connection, and more.
White Line Yellow Line Red Line | Connected | Poor Signal | Disconnected

Produkspesifikasjoner

Merke: StarIink
Kategori: Ruter
Modell: Router Gen 3

Trenger du hjelp?

Hvis du trenger hjelp med StarIink Router Gen 3 still et spørsmål nedenfor, og andre brukere vil svare deg




Ruter StarIink Manualer

Ruter Manualer

Nyeste Ruter Manualer