Statron 2225.2 Bruksanvisning

Les nedenfor 📖 manual på norsk for Statron 2225.2 (4 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 17 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 9 brukere

Side 1/4
Operating instruction lab
power supply unit
type 2225.2
The intended application of the power supply unit covers:
- link and operation of low-voltage consumers with an operating voltage between 0 and 24 VDC. The power input of
the consumer may not exceed 6,0 A.
Note! Absolutely read!
- Read this guidance exactly. With damage, which is caused by neglect of the guidance, the warranty claim goes
out. For damages we do not take over adhesion.
1. introduction
this power supply unit is universally applicable with its infinitely variable adjustment possibilities of voltage and
current for school, occupation, hobby etc.. An electronic current limiting protects the power supply unit against
overloading. Output voltage and - current are electronically stabilized and infinitely variable adjustable. Thus the
electronic restraint current can as adjustable Current limiting to be used, in order to protect consumers against a too
high power input. In the case of an overloading the output voltage is then lowered accordingly (in the case of short-
circuit on close 0V). With removal of the overload the output voltage adjusted before resets itself automatically. The
respective operating point - voltage - (u) - or restraint current (i) - is displayed by one red LED each. The adjusted
values are readable over 2 LCD displays or analog displays each. The voltage or current adjustment is made by one
double button each (rough- fine). Additionally a change .

Produkspesifikasjoner

Merke: Statron
Kategori: Ikke kategorisert
Modell: 2225.2

Trenger du hjelp?

Hvis du trenger hjelp med Statron 2225.2 still et spørsmål nedenfor, og andre brukere vil svare deg