Tiptop Audio MODEL 258T Bruksanvisning
Tiptop Audio
Tastatur
MODEL 258T
Les nedenfor 📖 manual på norsk for Tiptop Audio MODEL 258T (1 sider) i kategorien Tastatur. Denne guiden var nyttig for 28 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 14.5 brukere
Side 1/1
BUCHLA & TIPTOP AUDIO
DUAL OSCILLATOR MODEL 258
5cps 20kc
5cps 20kc
t
DUAL OSCILLATOR - MODEL 258t
Text from the Buchla 200 series catalogue from the 70's. Slight adjustments were made.
Processing input:
The processing control attenuverter
input permits control of pitch
scaling/inversion/expansion without
the need for a separate external
processor.
1V/Oct input:
Control Voltage input for 1V/oct
note tracking.
Frequency modulation control:
For adjusting vibrato depth or
creating clangorous or bell-like
tones, rich in non-harmonic upper
partials.
Oscillator frequency control:
Spans the audio spectrum of 5 Hz to
20 kHz with no range switching.
(The original graphic 5cps to 20kc
was only intended and noted to be
approximate.)
Processing control:
Used to set desired range of incoming
control voltage for expansion,
compression and inversion.
Waveshape control input:
Waveshapes can be varied from
sine to saw (OSC 1) and sine to
square (OSC 2). Voltage control of
waveshape enables powerful
dynamic control of timbre.
Two independent voltage-controlled oscillators. Each has one processing input, a frequency modulation input and a 1V/oct input.
Waveshapes, as well as frequency, can be voltage controlled. Model 258 oscillators feature low sine wave harmonic content,
negligible settling error, and high short and long-term stability, even with rapidly changing ambient temperatures.
TRIMMERS:
There are three trimmers for each oscillator on the back of the module:
1V/oct is the octave tracking trimmer and is set at the factory using high precision instruments.
SHAPE is the trimmer that set the sine wave, for the lower harmonic content of the sine wave.
VC WAVE SHAPE sets the response of the waveshaper to the incoming control voltage. Both SHAPE and VC WAVE SHAPE
trimmers are used to adjust the sine wave purity.
Eurorack 200 series
Size: 18HP - Depth: 45mm - Power: +12V 70mA / -12V 40mA
Produkspesifikasjoner
| Merke: | Tiptop Audio |
| Kategori: | Tastatur |
| Modell: | MODEL 258T |
Trenger du hjelp?
Hvis du trenger hjelp med Tiptop Audio MODEL 258T still et spørsmål nedenfor, og andre brukere vil svare deg
Tastatur Tiptop Audio Manualer
3 August 2025
6 April 2025
6 April 2025
6 April 2025
5 April 2025
5 April 2025
30 Mars 2025
30 Mars 2025
29 Mars 2025
29 Mars 2025
Tastatur Manualer
- LC-Power
- RGV
- Havis
- GoGEN
- AV:link
- Essentiel B
- Speed-Link
- Biltema
- Ketron
- Deltaco
- Black Box
- Hamlet
- Xtrfy
- Boss
- STANDIVARIUS
Nyeste Tastatur Manualer
20 Oktober 2025
19 Oktober 2025
19 Oktober 2025
18 Oktober 2025
18 Oktober 2025
15 Oktober 2025
13 Oktober 2025
11 Oktober 2025
11 Oktober 2025
11 Oktober 2025