Tripp Lite EMS1250UL Bruksanvisning

Tripp Lite batteri EMS1250UL

Les nedenfor 📖 manual på norsk for Tripp Lite EMS1250UL (12 sider) i kategorien batteri. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/12

Owner’s Manual

Quiet Mobile Power That Meets Federal Specification for Ambulances

Congratulations! You’ve purchased the most advanced, feature-rich Inverter/Charger designed for ambulance/EMS vehicle applications. Tripp

Lite Inverter/Chargers keep critical equipment in service by providing uninterrupted DC-to-AC power, inverted from user-supplied batteries.

Inverter/Chargers provide your equipment with utility- or generator-supplied AC electricity (filtered through premium ISOBAR® surge protec-

tion) whenever AC is available. In addition, your Inverter/Charger automatically powers your 12V DC system and recharges your connected

battery bank. Whenever the ambulance/EMS vehicle is on a call or when power blackouts, brownouts or high voltages occur, your Inverter/

Charger immediately and automatically switches over to inverting battery output to power connected AC equipment.

Better for Your Equipment Meets Safety Agency Standards

• Federal Specification KKK-A-1822E

• UL 458

Premium Protection Levels

• Built-In ISOBAR

Surge Protection

• Automatic Overload Protection

Ideal Output for All Loads

• Frequency-Controlled Output

• Automatic Load Switching

• Balanced Load Sharing

Better for Your Batteries Faster Battery Recharge

• High-Amp, 3-Stage Battery Charger (adjustable)

Critical Battery Protection

• Battery Charge Conserver (Load Sense)

• High-Efficiency DC-to-AC Inversion

Better for You Quiet, Simple, Maintenance-Free Operation

• Multi-Function Lights & Switches

• Dead Battery Startup

• Ignition Interlock

• Moisture-Resistant Construction*

Safety 2

Feature Identification 3

Operation 4-5

Configuration 5-6

Battery Selection 7

Mounting 8

Battery Connection 9

AC Input/Output Connection 10

Service/Maintenance 10

Troubleshooting 11

Warranty/Warranty Registration 11

PowerVerter

EMS Series DC-to-AC

Inverter/Chargers

Input Output

Invert: 12 VDC 120V, 60 Hz. AC

Charge: 120V, 60 Hz. AC 12 VDC

1111 W. 35th Street, Chicago, IL 60609 USA

Customer Support: (773) 869-1234

www.tripplite.com

* Inverter/Chargers are moisture-resistant, not waterproof.

Contents

WARRANTY

REGISTRATION

a chance to win a FREE Tripp Lite

product! www.tripplite.com/warranty

Important Safety Instructions

SAVE THESE INSTRUCTIONS!

This manual contains important instructions and warnings that should be followed during the installation, operation and storage of all Tripp

Lite Inverter/Chargers.

Location Warnings

• Although your Inverter/Charger is moisture resistant, it is NOT waterproof. Flooding the unit with water will cause it to short circuit

and could cause personal injury due to electric shock. Never immerse the unit, and avoid any area where standing water might

accumulate. Mounting should be in the driest location available.

• Leave a minimum of 2" clearance at front and back of the Inverter/Charger for proper ventilation. To avoid automatic Inverter/Charger

shutdown due to overtemperature, any compartment that contains the Inverter/Charger must be properly ventilated with adequate

outside air flow. The heavier the load of connected equipment, the more heat will be generated by the unit.

• Do not install the Inverter/Charger directly near magnetic storage media, as this may result in data corruption.

• Do not install near flammable materials, fuel or chemicals.

• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner will seriously inhibit the unit's

internal cooling, eventually causing product damage not covered under warranty.

• Install in land vehicles only.

Battery Connection Warnings

• Multiple battery systems must be comprised of batteries of identical voltage, age, amp-hour capacity and type.

• Because explosive hydrogen gas can accumulate near batteries if they are not kept well ventilated, your batteries should not be

installed (whether for a mobile or stationary application) in a “dead air” compartment. Ideally, any compartment would have some

ventilation to outside air.

• Sparks may result during final battery connection. Always observe proper polarity as batteries are connected.

• Do not allow objects to contact the two DC input terminals. Do not short or bridge these terminals together. Serious personal injury

or property damage could result.

Equipment Connection Warnings

In life support applications where failure of this equipment can reasonably be expected to cause the failure of life support

devices or to significantly affect their safety or effectiveness, such devices should be provided with at least one backup power

source by the ambulance/EMS vehicle operator.

• You may experience uneven performance results if you connect a surge suppressor, line conditioner or UPS system to the output of

the Inverter/Charger.

• Do not modify the Inverter/Charger’s plug or receptacle in a way that eliminates its ground connection. Do not use

power adapters that will eliminate the plug’s ground connection.

• Connect your Inverter/Charger only to a properly grounded AC power outlet. Do not plug the unit into itself;

this will damage the device and void your warranty.

• The Tripp Lite Inverter/Charger includes GFCI (ground fault circuit interrupter)-protected AC output receptacles.

• The main grounding lug should be connected to the vehicle chassis with a minimum #8 AWG wire.

Operation Warnings

• Your Inverter/Charger does not require routine maintenance. Do not open the device for any reason. There are no user serviceable parts inside.

• Potentially lethal voltages exist within the Inverter/Charger as long as the battery supply and/or AC input are connected. During any

service work, the battery supply and AC input connection (if any) should therefore be disconnected.

• Do not connect or disconnect batteries while the Inverter/Charger is operating in either inverting or charging mode. Operating Mode

Switch should be in the DC OFF position. Dangerous arcing may result.

Caution: These models have a failsafe AC pass-through feature where the AC output will be live (if AC input is

available) even though the operating mode switch is set to DC OFF.

Feature Identification

Identify the premium features on your specific model and quickly locate instructions on how to maximize their use.

Configuration DIP Switches: optimize Inverter/Charger operation

depending on your application. See Configuration section for

setting instructions.

Operating Mode Switch: controls Inverter/Charger operation.

The "AUTO/REMOTE" setting ensures your equipment receives

constant, uninterrupted AC power. It also enables the Inverter/

Charger to be remotely monitored and controlled with an

optional remote module (Trip Lite model APSRM4, sold sepa-

rately). The "CHARGE ONLY" setting allows your batteries to

return to full charge faster by turning the inverter off which halts

battery discharging. The "DC OFF" setting de-energizes the unit

and connects AC OUT to AC IN. See Operation section for

setting instructions.

"LINE", "INVERT", "LOAD" LEDs: show whether the

Inverter/Charger is operating from AC line power or DC battery

power. It also warns you if the connected equipment load is too

high. See Operation section for instructions on reading the indi-

cator lights.

"BATT VOLTAGE" LEDs: these three lights will turn ON in

several sequences to show approximate battery level. See Operation

section for instructions on reading the indicator lights.

DC Power Terminals: connect to your battery terminals. See

Battery Connection section for instructions. The included Quick

Connect Battery Cable Assembly

may be used to simplify

unit or battery replacement.

Ground Fault Circuit Interrupter (GFCI) AC Receptacles:

allow you to connect equipment that would normally be plugged

into a utility outlet. They feature ground fault interrupter

switches that trip if there is excessive current on the ground

safety wire.

AC Input Cord: connects the Inverter/Charger to any source of

utility- or generator-supplied AC power. See AC Input/Output

Connection section for instructions.

Resettable Circuit Breakers: protect your Inverter/Charger against

damage due to overload or charger failure. See Operation

section for resetting instructions.

Remote Control Module Connector: allows remote monitoring

and control with a remote control module (Tripp Lite model

APSRM4

, included with this model). See remote module

owner’s manual for connection instructions.

Battery Charge Conserver (Load Sense) Dial: conserves

battery power by setting the low-load level at which the Inverter/

Charger’s inverter automatically shuts off. See Configuration

Section for setting instructions.

Main Ground Lug: properly grounds the Inverter/Charger to

vehicle grounding system or to earth ground. See Battery

Connection section for instructions.

Multi-Speed Cooling Fan: quiet, efficient fan prolongs equipment

service life.

Ignition Interlock Control Jack: used to connect the inverter/

charger to the vehicle ignition switch. Disables AC power outlet

when the vehicle ignition switch is placed in the “Engine Run”

position. See p. 6 for connection instructions.

Rear View

APSRM4 Remote Control Module (included) Quick Connect Battery Cable Assembly (included)

Front View

112 4 9 3 2

5A 9A

Connect to + & - terminals on rear of unit.

Produkspesifikasjoner

Merke:	Tripp Lite
Kategori:	batteri
Modell:	EMS1250UL
Vekt:	10520 g
Bredde:	222.2 mm
Dybde:	228.6 mm
Høyde:	177.8 mm
Opprinnelsesland:	China
Pakkevekt:	12290 g
Sertifisering:	UL458,
USB-versjon:	2.0
Antall per pakke:	1 stykker
Inngangsspenning:	120 V
Utgangseffekt:	1250 W
Kapasitet:	2500 W
Utgangsstrøm:	120 V
Utgangsfrekvens:	60 Hz
Produktfarge:	Hvit
Antall USB-porter:	2
Type strømforsyning:	Innendørs
Pakkedybde:	274.3 mm
Pakkehøyde:	317.5 mm
Pakkebredde:	274.3 mm
Bærekraftsertifikater:	RoHS
Harmonisert system (HS)-kode:	8504.40.9570
Strømtype:	DC-to-AC
Inngangsfrekvens:	60 Hz
Kroppsmateriale:	Polykarbonat (PC)
Relativ luftfuktighet under drift (H-H):	0 - 95
Masterkassens (ytterkassens) bruttovekt:	12290 g
Masterkassens (ytterkassens) lengde:	274.3 mm
Produkter per masterkasse (ytterkasse):	1 stykker
Masterkassens (ytterkassens) bredde:	274.3 mm
Masterkassens (ytterkassens) høyde:	317.5 mm
Innput-strøm:	127 A
Automatisk justering av utgangs-spenning:	Ja
Justerbar utgangs-spenning:	Ja