Tripp Lite NGI-S04C2 Bruksanvisning

Tripp Lite Ikke kategorisert NGI-S04C2

Les nedenfor 📖 manual på norsk for Tripp Lite NGI-S04C2 (138 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 3 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/138

system, or transmitted in any form or by any means, whether electronic, mechanical,

photo copying, recording or otherwise, without the prior written permission of the

publisher.

FCC WARNING

This equipment has been tested and found to comply with the limits for a

class A device, pursuant to part 15 of FCC rules. These limits are designed

to provide reasonable protection against harmful interference in a

commercial installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communication.

Operation of this equipment in a residential area is likely to cause harmful

interference, in which case, the user will be required to correct the

interference at the user’s own expense.

This is a Class A product. In a domestic environment, this product may

cause radio interference in which case the user may be required to take

adequate measures.

Take special care to read and understand all the content in the warning

boxes.

Do not work on the system or connect or disconnect cables during

periods of lightning activity.

Warning

Before working on equipment that is connected to power lines,

remove jewelry (including rings, necklaces, and watches). Metal

objects will heat up when connected to power and ground and can

cause serious burns or weld the metal object to the terminals.

Do not stack the chassis on any other equipment. If the chassis falls, it

can cause severe bodily injury and equipment damage.

An exposed wire lead from a DC-input power source can conduct

harmful levels of electricity. Be sure that no exposed portion of the

DC-input power source wire extends from the terminal block plug.

Ethernet cables must be shielded when used in a central office

environment.

If a redundant power system (RPS) is not connected to the switch,

install an RPS connector cover on the back of the switch.

Read the wall-mounting instructions carefully before beginning

installation. Failure to use the correct hardware or to follow the

correct procedures could result in a hazardous situation to people and

damage to the system.

Before performing any of the following procedures, ensure that power

is removed from the DC circuit.

Warning

Produkspesifikasjoner

Merke:	Tripp Lite
Kategori:	Ikke kategorisert
Modell:	NGI-S04C2
Vekt:	870 g
Bredde:	50 mm
Dybde:	119.9 mm
Høyde:	160 mm
LED-indikatorer:	Speed, Power
Sertifisering:	FCC, CE, RoHS, REACH
Auto MDI/MDI-X:	Ja
DHCP-funksjoner:	DHCP snooping
DIN-skinnemontering:	Ja
Produktfarge:	Sort
Driftstemperatur (T-T):	-10 - 60 °C
Oppbevaringstemperaturomåde (Celsius):	-40 - 85 °C
Kroppsmateriale:	Metall
Relativ luftfuktighet under drift (H-H):	5 - 95
Svitsjtype:	Uhåndtert
Antall Basic switching RJ-45 Ethernet-ports:	4
Basic switching RJ-45 Ethernet ports-type:	Gigabit Ethernet (10/100/1000)
Størrelse på adressetabell:	8000 oppføringer
Ruting/svitsjekapasitet:	12 Gbit/s
Kan stables:	Ja
Strømforsyning medfølger:	Ja
Strøm over Ethernet (PoE):	Nei
DC inngående spenning:	20 - 60 V
SFP module antall spor:	2
MAC-adresse automatisk læring støttes:	Ja