Tripp Lite P937-000 Bruksanvisning

Les nedenfor 📖 manual på norsk for Tripp Lite P937-000 (16 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 5 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Side 1/16
Owner’s Manual
40-Pin Male IDE to
2.5”/3.5”/5.25” SATA Adapter
Model: P937-000
1111 W. 35th Street, Chicago, IL 60609
www.tripplite.com/support
Copyright © 2017 Tripp Lite. All rights reserved.
PROTECT YOUR INVESTMENT!
You could also win an ISOBAR6ULTRA surge protector—a $100 value!
www.tripplite.com/warranty
Español 5 • Français 9 • Русский 13
17-02-305-9336C4.indb 1 3/6/2017 4:44:21 PM
2
Product Features
System Requirements
Package Includes
Installation
Connect a SATA drive to an IDE/ATA motherboard
Ideal for older motherboards that do not support SATA
Optical Disk Drive (ODD) support, including Blu-ray™, DVD and
CD-ROM drives
Supports data transfer rates up to 6 Gbps (SATA I/II/III)
Compatible with Ultra ATA 133 specification
Plug-and-Play; no software or drivers required
Computer with an available IDE connection
SATA drive
40-pin IDE drive cable
P937-000
4-Pin Molex Power Cable
Owner’s Manual
Note: To use the installed SATA drive as a bootable device, it must be able to
operate in Master Mode
1. Turn off the computer, unplug its power cord, and disconnect all
peripheral devices (e.g. monitor, keyboard, etc.).
2. Open the computer chassis. Make sure the hard drive is fastened
to the chassis appropriately.
17-02-305-9336C4.indb 2 3/6/2017 4:44:21 PM
3
Installation
3. Using the jumper (J3) provided on the circuit board, select the
mode you want the installed SATA drive to operate under (S for
Slave, M for Master).
4. Connect the SATA drive to the circuit board using the designated
SATA power and data ports. Insert the connector on the board into
the drive ports.
5. Connect the LP4 end of the provided 4-Pin Molex Cable to the
computer’s power supply and the SP4 end to the adapter unit’s
power port.
6. Using a 40-Pin IDE cable, connect the IDE connector on the
adapter unit’s circuit board to an available IDE port on the
motherboard. The pin positioning will ensure a proper connection.
An arrow on the circuit board indicates Pin 1 of the IDE connector.
7. Replace the computer chassis and power cord on the computer.
Warranty & Product Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a period
of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty is
limited to repairing or replacing (at its sole option) any such defective products. To obtain service
under this warranty, you must obtain a Returned Material Authorization (RMA) number from TRIPP
LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP LITE or an
authorized TRIPP LITE service center with transportation charges prepaid and must be accompanied
by a brief description of the problem encountered and proof of date and place of purchase.
This warranty does not apply to equipment which has been damaged by accident, negligence or
misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Some states do not permit limitation or exclusion of implied warranties; therefore, the aforesaid
limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF THIS PRODUCT,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Specifically, TRIPP LITE is not liable
for any costs, such as lost profits or revenue, loss of equipment, loss of use of equipment, loss of
software, loss of data, costs of substitutes, claims by third parties, or otherwise.
17-02-305-9336C4.indb 3 3/6/2017 4:44:21 PM

Produkspesifikasjoner

Merke: Tripp Lite
Kategori: Ikke kategorisert
Modell: P937-000
Opprinnelsesland: China
Pakkevekt: 10 g
Vertsgrensesnitt: IDE
Utgangsgrensesnitt: SATA
Produktfarge: Rød
Pakkedybde: 130 mm
Pakkehøyde: 30 mm
Pakkebredde: 150.9 mm
Bærekraftsertifikater: RoHS
Harmonisert system (HS)-kode: 8473.30.9100
Intern: Ja
Masterkassens (ytterkassens) GTIN (EAN/UPC): 10037332199734
Masterkassens (ytterkassens) bruttovekt: 750 g
Masterkassens (ytterkassens) lengde: 169.9 mm
Produkter per masterkasse (ytterkasse): 10 stykker
Masterkassens (ytterkassens) bredde: 277.9 mm
Masterkassens (ytterkassens) høyde: 145 mm

Trenger du hjelp?

Hvis du trenger hjelp med Tripp Lite P937-000 still et spørsmål nedenfor, og andre brukere vil svare deg




Ikke kategorisert Tripp Lite Manualer

Ikke kategorisert Manualer

Nyeste Ikke kategorisert Manualer