Tripp Lite SmartRack SR1UPNLTEMP Bruksanvisning

Tripp Lite Ikke kategorisert SmartRack SR1UPNLTEMP

Les nedenfor 📖 manual på norsk for Tripp Lite SmartRack SR1UPNLTEMP (12 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 4 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 2 brukere

Last ned PDF

Side 1/12

Owner’s Manual

SmartRack

Panel-Mounted Ambient

Air Temperature Monitor

Model: SR1UPNLTEMP

Español 5 • Français 9

1111 W. 35th Street, Chicago, IL 60609 USA • tripplite.com/support

WARRANTY REGISTRATION

automatically entered to win an ISOBAR

surge protector in our monthly drawing!

tripplite.com/warranty

Important Safety Instructions

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation

of the product described in this manual. Read all instructions and warnings thoroughly before attempting

installation. Failure to comply may affect the warranty and cause property damage and personal injury.

Connection, Installation and Location Warnings

• Inspect the shipping container and the unit for shipping damage. Do not use the unit if it is damaged.

• This product is designed to be installed in commercial locations, such as IT data racks where only adults are normally present.

• Install in a controlled indoor environment, away from moisture, temperature extremes, ﬂammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• For best performance, keep the indoor temperature between 32º F and 104º F (0º C and 40º C).

• Do not attempt to modify or drill holes into the enclosure for mounting. Use the mounting holes provided.

• Install in accordance with National Electrical Codes (220-240V models).

• Install in accordance with National Electrical Code standards ANSI/NFPA 70 and Canadian Electrical Code, Part I, C22.1 (120V models).

• To reduce the risk of ﬁre, connect only to a circuit provided with branch circuit overcurrent protection in accordance with the National

Electrical Code, ANSI/NFPA 70 and the Canadian Electrical Code, Part I, C22.1 (120V models).

• Be sure to use maximum 16A overcurrent protection, in accordance with the plug/equipment rating, for the installation (220-240V

models).

• Be sure to use maximum 20A overcurrent protection, in accordance with the plug/equipment rating, for the installation (120V models).

• The equipment must be connected to an earthed ground mains outlet.

• Securely fasten the fans in place with screws.

• When using tools, use eye protection and follow all other safety precautions recommended by the tool manufacturer and required by

applicable regulations.

• This product does not require routine maintenance. Do not open the unit for any reason.

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness is not recommended.

Explanation of Symbols

Caution, Risk of Danger

Caution, Moving Fan Blades

Installation

Install the ambient air sensor where it will sample an average air

temperature.

Attach and secure the unit to the rack enclosure with user-

supplied hardware.

Note: The user must determine the ﬁtness of hardware before mounting.

If hardware and procedures are not suitable for your application, contact

the manufacturer of your rack or rack enclosure for a solution.

Identify the desired 1U space within a rack enclosure to mount

the fan unit.

Align the mounting ears located on the front panel of the unit with

the rack enclosure’s front vertical mounting holes.

1U RACK SPACE

Connect the power adapter plug to the unit

, then plug the

power supply into a power source that supports a NEMA 5-15P

plug, such as a wall outlet, power distribution unit (PDU) or

uninterruptible power supply (UPS)

Produkspesifikasjoner

Merke:	Tripp Lite
Kategori:	Ikke kategorisert
Modell:	SmartRack SR1UPNLTEMP
Innebygd skjerm:	Ja
Vekt:	1250 g
Bredde:	439.4 mm
Dybde:	95.2 mm
Høyde:	43.4 mm
Opprinnelsesland:	China
Pakkevekt:	1800 g
Nøyaktighet:	1 °C
Materiale:	Stål
Temperaturmåleområde:	-50 - 150 °C
Sensortype:	Temperatursensor
Kabellengde:	1.83 m
Pakkedybde:	106.9 mm
Pakkehøyde:	190 mm
Pakkebredde:	516.9 mm
Bærekraftsertifikater:	RoHS
Modell/Type:	Temperaturkontroller
Temperature measuring units:	F, °C
Formål:	Innendørs
Masterkassens (ytterkassens) GTIN (EAN/UPC):	10037332240610
Masterkassens (ytterkassens) bruttovekt:	10270 g
Masterkassens (ytterkassens) lengde:	562.1 mm
Produkter per masterkasse (ytterkasse):	5 stykker
Masterkassens (ytterkassens) bredde:	537 mm
Masterkassens (ytterkassens) høyde:	214.9 mm