Triton FetHead Broadcast Bruksanvisning
Triton
Ikke kategorisert
FetHead Broadcast
Les nedenfor 📖 manual på norsk for Triton FetHead Broadcast (2 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 22 personer og ble vurdert med 4.6 stjerner i gjennomsnitt av 11.5 brukere
Side 1/2
FetHead Broadcast
Philosophy
FetHead Broadcast is an in-line microphone preamplifier specially designed for operating in challenging
live environments. offers 23dB of low noise high quality amplification which can be FetHead Broadcast
applied to either dynamic or condenser microphones as phantom power is transferred to the microphone.
Recommended application
In broadcast or live performance situations, a microphone signal often travels through long cables before
reaching the mixing desk. When small microphone signals travel adjacent to power lines or dimmed light
cables, audible signal interference is likely to be induced into the microphone cable. Fethead Broadcast
amplifies the microphone signal before the cable and greatly improves the signal to noise ratio offering a
much higher quality signal to the mixing desk. A low impedance output buffer enables output drive to
long cables (up to 3000 meters). Another advantage is that the FetHead Broadcast does not need main
supplies or batteries.
Operation
Connect your microphone on the input XLR of your . At the opposite side an XLR cable Fethead Broadcast
runs from your Fethead Broadcast to the mixer/preamp .it’s ready for use with any type of phantom
powered setup. Fethead Broadcast uses phantom power to power its circuitry, but also provides enough
phantom power to power the connected microphone.
Circuit topology
FetHead Broadcast utilizes a low noise FET amplifier circuit, which reveals every detail, followed by a low
impedance output buffer which reveals every detail with pinpoint accuracy and offers high-end sound
quality.
Features
• Low noise Class A FET amplifier
• Low impedance output buffer
• 23 dB amplification
• Rugged enclosure with balanced XLR input/output
• internal rumble filter
• frequency response 40Hz-100 kHz (+/- 1dB)
• Z-in 680 Ω
• Circuit is powered with 48V phantom power
Dimensions
height: 1,22” / 31mm
width: 1” / 26mm
length: 3,11” / 79mm
weight: 80 g
Registration
Thank you for purchasing a Triton Audio Fethead Broadcast.
To register your product please go to: tritonaudio.com/support/product-registration/
Produkspesifikasjoner
| Merke: | Triton |
| Kategori: | Ikke kategorisert |
| Modell: | FetHead Broadcast |
Trenger du hjelp?
Hvis du trenger hjelp med Triton FetHead Broadcast still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Triton Manualer
23 Februar 2025
7 Desember 2024
7 Desember 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
16 Oktober 2024
Ikke kategorisert Manualer
- Aquael
- Sebo
- Interphone
- Cadac
- Moxa
- Ednet
- Geneva
- Sauber
- Dito Sama
- McIntosh
- Luxul
- Harley Benton
- Aqua-Vu
- Everdure
- Frilec
Nyeste Ikke kategorisert Manualer
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025
23 Oktober 2025