Ventev TW-HCEN-FLP Bruksanvisning

Les nedenfor 📖 manual på norsk for Ventev TW-HCEN-FLP (3 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 27 personer og ble vurdert med 4.7 stjerner i gjennomsnitt av 14 brukere

Side 1/3
www.ventev.com/infra sales@ventev.com 800.851.4965
Universal Flush Mount
Ceiling Enclosure Installation
Instructions for Installation
1) To install the flush mount, cut an opening into the
ceiling drywall as shown in Figure 1. (TIP: Drill
holes at the corners of the cutout and cut between
the holes.) The chamfered corners of the profile
are necessary to allow the lid to completely cover
Figure 1.
Figure 2.
2) Loosen the thumbscrews on the backplate of the base
assembly and remove.
3) Rotate the clamp arms in so they are against
the base as shown. With the base held close
to the ceiling opening, route the ethernet cable
through the knockout hole in the base. A
Romex connector is supplied to securely clamp
the cable to the enclosure.
Figure 3.
Figure 4.
4) Insert the base into the ceiling opening, making sure
that the sides of the base with the clamp arms are in
line with the 11 ¼” sides of the opening.

Produkspesifikasjoner

Merke: Ventev
Kategori: Ikke kategorisert
Modell: TW-HCEN-FLP

Trenger du hjelp?

Hvis du trenger hjelp med Ventev TW-HCEN-FLP still et spørsmål nedenfor, og andre brukere vil svare deg