Vestil CART-23-10-DC Bruksanvisning
Vestil
Ikke kategorisert
CART-23-10-DC
Les nedenfor 📖 manual på norsk for Vestil CART-23-10-DC (12 sider) i kategorien Ikke kategorisert. Denne guiden var nyttig for 2 personer og ble vurdert med 4.5 stjerner i gjennomsnitt av 1.5 brukere
Side 1/12
0221
01-126-106.doc
V
ESTIL MFG. CO. 1
VESTIL MANUFACTURING CORP.
2999 N. Wayne St., Angola, IN 46703
Ph: 260-665-7586 · Fax: 260-665-1339
E-mail: sales@vestil.com · Website: www.vestil.com
CART-23 & -24, ALL MODELS
Operation Instructions ……………………….……… 2-3
Routine Maintenance & Safety Checks ……………… 4
Exploded Power Unit Drawing & BOM ………......... 5-6
Electrical & Hydraulic Diagrams …………................ 7-8
Power Unit’s Operation ………………...…..………..... 9
Troubleshooting …………………………....………… 10
Safety Label Identification .............................................11
Warranty …………………………………….……..…. 12
IMPORTANT NOTES, WARNINGS AND SAFETY INSTRUCTIONS
Ensure that all employees understand and follow the following.
* Failure to read and understand this owner’s manual before using or
servicing the cart constitutes a misuse of the product. All persons who
will use or care for this product must be familiar with this material.
o The load
must be removed and the platform fully lowered before any
work is performed on the cart.
o Ensure that all safety and warning labels stay in place and are legi
ble.
o Do not use the cart if any damage or unusual noise is observed.
o Always watch the platform and the load carefully when the cart is in
operation.
o The cart is intended for use only on compacted, improved surfaces.
o Do not use brake fluid or jack oils in the hydraulic system. If oil is
needed, use an anti-wear hydraulic oil with a viscosity grade of
150 SUS at 100°F, (ISO 32 cSt @ 40°C), or Dexron transmission fluid.
o Contact the manufacturer for any needed MSDS information.
♦ Do not perform any modifications to the cart without the manufacturer’s
approval. Failure to receive authorization for changes to the equipment
could void the warranty.
♦ Maintenance and repairs are to be done only by personnel qualified to
perform the required work. Consideration will not be given for warranty
repair charges without prior written authorization by the manufacturer.
WHEN ORDERING
REPLACEMENT PARTS:
We take pride in using quality
parts on the equipment we
manufacture. We are not
responsible for equipment
problems resulting from the use
of unapproved replacement
parts.
To order replacement or
spare parts for this equipment,
contact the factory.
In any communication with
the factory please be prepared
to provide the machine’s serial
number, which is indicated on
the machine dataplate.
RECEIVING INSTRUCTIONS
Every unit is thoroughly
tested and inspected prior to
shipment. However, it is
possible that the unit could
incur damage during transit.
Inspect the unit closely when
it arrives. If you see evidence
of damage or rough handling to
either the packaging or to the
product when it is being
unloaded, immediately
make a
note of it on the Bill Of Lading!
It is important that you
remove the product’s packaging
upon its arrival to ensure that
there is no concealed damage
or to enable a timely claim with
the carrier for freight damage.
Also verify that the product
and its specifications are as
ordered.
OWNER’S
MANUAL
NOTE: Pages 5-6 are views of the modular power unit. These diagrams only apply to units manufactured before
12-01-2018. Units manufactured after 12-01-2018 receive a redes
igned modular power unit (MPU GEN2).
Diagrams and operating instructions for GEN2 power units are provided in separate manuals.
0221 CART manual, power unit operation.doc
2 of 12
OPERATION INSTRUCTIONS – CART-23, -24
o Ensure that all employees involved in the operation of this cart understand and follow these instructions!
The standard model CART is suitable for use in most industrial and commercial locations. It is intended to be
used to transport and lift stable, evenly-distributed, non-hazardous loads and containers with rigid sides having a
size or footprint approximately the same size as the platform.
Loading:
The load rating, in pounds, is shown on the machine dataplate located on the left corner of the push handle
end of the platform. It indicates the net capacity of the CART with a static load that is centered and evenly
distributed on the platform.
Warning: The platform’s rollers are not captured. Therefore, do not overhang any load at the hinged end of the
platform – that could cause the roller end of the platform to tip up and dump the load. For applications
involving side or end edge loading, consult the factory.
Note: The addition of any ancillary equipment to the cart by third parties must be taken into account when
determining the maximum working load to be placed on the platform.
Warning: Do not exceed the cart’s load ratings. Injury to personnel or permanent damage to the cart could
result from exceeding the listed capacity.
Operation:
Inspect the perimeter pinch point guards’ operation daily (DC units).
Warning: Keep all personnel clear of the machine when it is in operation. Be certain no part of any person or
object is under any part of the platform before lowering the unit.
Caution: Always carefully watch the platform and any load on it when it is in operation.
Do not exceed a rate of two feet per second when transporting a load with the cart.
o The standard manually-powered CART is furnished with a two-speed foot pump
. Under empty or low load
conditions, the pump pushes a higher volume of fluid to the cylinder and thus lifts the platform with fewer foot
strokes. With a moderate to full load, the pump will automatically reduce its output in order to generate the
required hydraulic pressure.
To lift the platform, simply repeatedly press the foot pump’s foot treadle. To lower the platform, press the
small lever at the left corner of the pump with your toe. The unit will hold its position when the lowering lever
is released.
o The standard DC-powered CART is furnished with a constant-pressure (dead-man st
yle) pushbutton control.
Pressing the “UP” pushbutton will turn on the power unit to raise the platform. The platform will raise only
while the control is pressed. Upon releasing the control, the platform will stop and hold its position.
Pressing the “DOWN” pushbutton will energize the lowering valve to allow the platform to descend by gravity
(the motor does not run). Again, releasing the control will stop the platform movement, and the unit will hold
its position.
Caution: Never use the cart if any damage or unusual noise is observed, if it is in need of repairs, or if it seems
to be malfunctioning. Notify your supervisor or maintenance personnel if you notice anything out of the
ordinary.
On DC-powered units, attempting to raise the lift when the battery is low will cause the motor relay
protection to prevent the motor’s operation. Adequate battery voltage is indicated by a green LED on the motor
relay. See the next page for more notes regarding operation of battery-powered units.
Ensure that all safety and warning labels stay in place and are legible. Refer to the labels page in this manual.
Produkspesifikasjoner
| Merke: | Vestil |
| Kategori: | Ikke kategorisert |
| Modell: | CART-23-10-DC |
Trenger du hjelp?
Hvis du trenger hjelp med Vestil CART-23-10-DC still et spørsmål nedenfor, og andre brukere vil svare deg
Ikke kategorisert Vestil Manualer
5 Oktober 2025
5 Oktober 2025
5 Oktober 2025
5 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
4 Oktober 2025
Ikke kategorisert Manualer
- Black Hydra
- Das Keyboard
- Glorious
- NEO Tools
- Teufel
- Baby Jogger
- PoLabs
- Audio-Technica
- MGL Avionics
- Eufy
- Mistral
- Bresser
- Prince Castle
- Arendo
- AV Tool
Nyeste Ikke kategorisert Manualer
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
12 Oktober 2025
SVS SoundPath Tri-Band Wireless Audio Adapter Bruksanvisning
12 Oktober 2025
12 Oktober 2025